Manual SQlab ERGOLUX (page 38 of 96) (English, German, Dutch, French)

742373

Zoom out

Zoom in

1/96

SQlab | SPORTS ERGONOMICS | ERGOLUX® SADDLES | EDITION US 2019-02 | Page 14

NOT

Tightening torques

Observe the tightening torque of the saddle clamping stated in the operating inst-

ructions for your seat post.

Never exceed the maximum tightening torque of  Nm. If there is a conflict between

the torque specications, please contact your dealer.

This may lead to an impairment of product safety and damage with consequent bre-

akage. In such case, the saddle frame may suddenly and unexpectedly break during

use and an accident could occur.

Warning

The tightening torque of the clamping screws on the seat post depends on the seat post model. However, do not use a seat post for

which the tightening torque of the bolts on the seat stay clamp is specied by the manufacturer to be greater than  Nm. Exceeding

the tightening torque can lead to bre cracks or pinching, which can cause a steering failure that could cause a crash.

Warning

Even a short ride with one or more loose screws on the seat post can damage the seat stays so much that they can no longer be

used safely.

• Check the tightening torque of the clamping screws on the seat stays aer – km and then at least four times annually for the

correct torque and tighten if necessary. When checking the tightening torque, make sure not to exceed the maximum tightening

torque.

• Never ride with a loose saddle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SQlab ERGOLUX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SQlab ERGOLUX Manual

Product: