Manual Spartherm Nova E H2O (page 19 of 28) (English)

810449

Zoom out

Zoom in

1/28

GB 19

• The fireplace insert locking door must always be operated with a

self-closing door. This means that the combustion chamber door is gen-

erally closed. The door may only be opened to put on more firewood or

for cleaning when in a cool state. Manipulation of the closing device is

prohibited.

• The distance between flammable parts/furniture and the view pane must

be at least 80 cm!

• The fireplace insert is designed for the burning of dry, untreated wood

logs with adhering bark and wood briquettes.

• Operation in the partial load range results in low flue gas temperatures.

Continuous operation of the Nova E H2O in the partial load range can

cause chimney damage. For this reason, we recommend an hourly wood

feed quantity of 5-6 kg during a burning day. The quantity of wood to

be supplied should not be less than 2/3 of the recommended wood feed

quantity.

• The thermally activated flue gas damper integrated in the heat

exchanger of the Nova E H2O automatically controls the function. At a

sufficiently high flue gas temperature (approx. 150-200°C), the flue

gas damper closes automatically. Thus the flow of flue gas is routed

through the heat exchanger. If the flue gas temperature drops under this

temperature again, the flue gas damper opens. For better efficacy of the

heat exchanger, the Nova E H2O should be fired as uniformly as possible,

and frequent burn-down to the basic embers should be avoided in order

to obtain heat dissipation of the heat exchanger that is as uniform as

possible and to avoid low chimney temperatures.

• Double glazing (IR reflective surface): Through application of oxidic

coatings on the glass surface, infrared spectral components from the

combustion chamber are reflected to a great extent. These coatings

generate the interference colours (similar to a rainbow), the so-called IR

reflective surface. Through this colouration, the quality characteristic of

the „IR reflective surface“ is visible, i.e. recognisable. This colouration

cannot be removed.

• To operate the fireplace insert with nominal heat output, the following

prerequisites are necessary:

- Combustion must be operated with a closed door.

- Chimney draught: 12 Pa

- Wood: Dry beech wood (moisture < 18%)

- Wood feed quantity: 4.6 kg; distributed over four similar logs

- Air setting: Almost middle position, may need to be slightly

adapted depending on local conditions (see example). During

the combustion phase the air lever can be opened for several

minutes.

- At a combustion time of approx. 70 minutes the provided

output of the fireplace insert that is given off is approx. 14 kW.

Example of wood placement

with air adjustment

5. CLEANING AND MAINTENANCE

For cleaning, also comply with the instructions in the operating manual

of the fireplace inserts. The instructions in this installation and operating

manual refer only to the cleaning of the heat exchanger of the Nova E H2O.

Bear in mind that through cleaning, contamination of the setup room and the

clothing worn can occur. We recommend that you protect the area around

the fireplace insert opening against contamination with foil or with a cloth.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Nova E H2O in the language / languages: English as an attachment in your email.

The manual is 3.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Nova E H2O

Spartherm Nova E H2O User Manual - German - 28 pages

Spartherm Nova E H2O User Manual - Dutch - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spartherm Nova E H2O Manual

Product: