Manual Soundmaster CDMP 9933PRT (page 9 of 16) (English)

562117

Zoom out

Zoom in

1/16

DUBBING (DECK B) TO (DECK A)

MAINTENANCE

This unit enables you to duplicate a pre-

recorded tape to another tape by using the

unit-in double deck mechanisms. It is

performed only one wa

y, from the DECK B

(playback) to DECK A (

recording).

Dubbing at normal Speed

Note:

Be sure the HIGH SPEED DUBBING switch

is SET

AT NORMAL in order to record

at no

rmal speed.

Press the POWER switch to ON.

2. Set the

TAPE function selector.

3. Insert a p

re-recorded cassette into the

DECK B and a blank cassette into the

DECK A.

Press the DECK A PAUSE button and

then p

ress the RECORD button.

Press the DECK B PLAY button to start

dubbing.

6. Adjust the VOLUME & EXTRA BASS

cont

rols to desired sound level and

sound equalization.

Dubbing at High Speed

This unit is equipped with a HIGH SPEED

DUBBING system which allows duplicating

a p

re-recorded tape at approximately two-

thi

rds the time of the duration at normal

speed.

Slide the HIGH SPEED DUBBING switch,

and follow the same p

rocedure as instructed

in "DUBBING

AT NORMAL SPEED".

When dubbing a p

re-recorded cassette tape

at HIGH SPEED in

TAPE function, a

chattering sound is hea

rd. To avoid this, set

the VOLUME cont

rol to a minimum or set

the desi

red FUNCTION button according to

the sou

rce to be heard.

Note:

When the dubbing at HIGH SPEED is in prog

ress,

do not

release the HIGH SPEED SWITCH, since

this will vary the speed of the program and ruin the

recording.

Power Switch

After using the unit, turn off the power by

releasing the POWER switch.

Cleaning the unit

To keep the unit clean, simply wipe with a soft

clean cloth moistened with plain lukewarm

wate

Cleaning the Heads

To ensure the continued high performance

of your unit, periodically clean the heads and

pinch rollers to prevent accumulation of dust

or tape oxide deposits. Failure to clean these

parts may result in inferior sound quality,

dist

ortion of recorded sound, deterioration

reproduction of high frequencies, and

inconsistent tape speed.

1. Open both cassette compartment lids.

Moisten a cotton bud with head cleaner

or methylated spirit and apply to the

faces of heads, rubbing gently until all

traces of dirt or oxide a

re removed.

Also clean the surfaces of the pinch

rollers and the capstans.

y, clean and polish the faces of the

heads with a piece of cloth.

Stylus (needle) Replacement

Replacement of a wo

rn stylus can be easily

accomplished as follows.

1. Raise the "

Tone Arm."

To remove the old stylus, pull out the

stylus assembly in the di

rection shown,

holding the head shell with other hand.

3. Then install the new stylus by pushing it

gently into the cartridge (hold by the

edge to p

revent damage to stylus) until it

clicks into place.

Cartridge

Stylus assembly

Cotton Bud Capstan

EarseH ead Pinch Roller

Record/Play Head

Cotton Bud Capstan

Pinch Roller

Play Head

TAPE B

TAPE A

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster CDMP 9933PRT in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Soundmaster CDMP 9933PRT Manual

Product: