562117

Soundmaster CDMP 9933PRT Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
1) Press the POWER button to turn the unit on.
2) Select the CD FUNCTION button.
The CD Disc tray will turn to check if any discs are present.
If no discs are in the tray, NO DISC will appear in the displa
y.
3) Press the OPEN/CLOSE button to open the disc compartment.
The CD tray will open, exposing the right and left disc holders. The third disc holder will remain
in the unit. To expose the third disc holder, press one of the DISC No. buttons.
4) When the CD Compartment has opened, remove a disc from its case and place it carefully in
the CD tray with the label side facing up.
5) Press the OPEN/CLOSE button to close the disc compartment.
This unit will allow you to open the disc tray whilst in the PLAY mode to allow you to load another
one or two discs without interrupting play by playing the DISC CHANGE button.
The disc compartment may be opened at any time by pressing the OPEN/CLOSE button.
Remove the CD's only after the compartment has fully opened.
Press the Disc changer button and the trays will turn clockwise automatically allowing the
removal of the discs.
Normal Playback
Press the CD function button.
Press the OPEN/CLOSE button to open the disc compartment.
Press the DISC Changer button to select the Disc.
Press the OPEN/CLOSE button to close the disc compartment.
After the disc number, total number of tracks and playing time is displayed, press the PLAY/PAUSE
button to start play. The first track will begin to play and the CD will then play all tracks on all
discs, when mo
re than one CD is loaded. At the end of the disc, the unit will switch to STOP
mode.
Important Information
This compact disc player has built-in er
ror compensation circuits to correct minor defects in
a disc. The
re are limits, however, to the amount of correction available.
In some cases, the CD player may skip some tracks on a disc dur
ing disc play. This problem
may be caused by defects (such as scratches) in the disc being
played, which a
re too large for
the er
ror compensation circults to handle. If you encounter this problem, check the CD players
operation as follows befo
re having the unit serviced.
Play a new disc. If the CD player operates normall
y, the skipping problem is probably due to a
defective disc or dirty disc.
To Stop a CD Part Way Through
Press the STOP button. Disc play will stop, and the display will show the total number of tracks
and the total playing time for the CD.
To temporarily stop disc play ( PAUSE mode), press the PLAY/PAUSE button. Disc play will
pause at the cur
rent play position.
To resume disc play, press the PLAY/PAUSE button again.
PLAYING CDS
LOADING CDS
10
1)
2)
3)
4)
5)
1)
2)
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster CDMP 9933PRT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster CDMP 9933PRT in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info