562117
7
Zoom out
Zoom in
Previous page
1/16
Next page
Note :
Remove the stylus protector.
Be sure that the tone arm is detached from the
to
ne arm rest before operation and re-secured
again afterward.
1.
Press the POWER switch to ON.
2. Set the FUNCTION switch to the
PHONO
3. Set the speed selector to the p
roper
position depending on the
record to be
played.
4. Place the
record on the platter (if
required, use the 45 rpm adaptor).
5. Lift the tone arm f
rom the rest and slowly
mov
e it to the edge of the record. The platter
will begin to
rotate.
6. Place the tone arm to the desired
position.
7. Adjust VOLUME & EXTRA BASS
con
trols to the desired sound level and sound
equalization.
8. At the end of
record, the platter will
automatically stop
rotation. Lift the tone
ar
m from the record and return it to the rest.
9.
To stop manually, lift the tone arm from
the
record , and return it to the rest.
6
PHONO
Inserting and Removing the Cassette
Tape
Open the cassette compartment lid by
pressing the STOP/EJECT button. Insert
the cassette placing the full
reel on the left
(visible th
rough the window) and the
exposed section of the tape at the bottom.
Close the compartment lid. Now the unit is
ready for operation. To use the second
track, p
ress the STOP/EJECT button and
remove the cassette. Turn the cassette
around and reinsert it as previously
described.
Recommended Cassette Tapes
In order to obtain optimum performance with
the built-in cassette tape deck, it is essential
to use only high quality cassette tapes. The
bias and equalization of your tape deck is
adjusted to yield excellent
results if used
with brand name tapes. Use C-30, C-60
and C-90 cassettes only.
We do not
recommend C-120 cassettes because
they can be subject to mechanical instability
and p
roper constant tape tension cannot be
cont
rolled.
Checking the Cassette
Make su
re that the cassette tape has no
slack prior to inserting it into the
recorder.
Safeguard Against Accidental
Erasure
To protect valuable recordings from accidental
erasing
, the tape deck and the cassette are
eq
uipped with standard safety features. To
keep the recorded material carefully, break out
the tabs on the back of the cassette with a knife
or
screwdriver. To protect the side A (1) from
accidental erasure, break out the right side
ta
b (2). To record on a cassette whose tabs
hav
e been broken, simply attach adhesive
tap
e (3) over the tab opening. The REC button
wil
l not lock in position when a cassette tab
has been
removed.
CASSETTE TAPES
(1) SIDE A
(3) ADHESIVE
TAPE
(2)
TAB
Unless the tape is taut, it may wind around
the head mechanism and t
rouble may result.
Use a pencil as shown in the Figu
re to take
up slack on one of the
reels.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster CDMP 9933PRT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster CDMP 9933PRT in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info