562117
8
Zoom out
Zoom in
Previous page
1/16
Next page
7
The TAPE B is used for playback only. The
TAPE A is used both for recording and
playback.
Do not tu
rn the unit off while the tape is
running. Otherwise, the pinch
roller may be
damaged.
1. Press the POWER switch to ON.
2. Set the
TAPE function selector.
3.
Press the appropriate STOP/EJECT
button and insert a
recordable cassette.
4.
Press the PLAY button to start playback.
5. Adjust the VOLUME & EXTRA BASS
controls to the desired sound level and sound
equalization.
6.
Press the STOP/EJECT button to stop
playback at any time. When the end of the
tape is
reached, the automatic stop will be
activated.
Fast-Forwa
rd and Rewind
For fast winding or
rewinding the tape, press
the
F.Fwd or REW button. Press the STOP/
EJECT button when the desi
red location has
been
reached. When the end of the tape
has been
reached, the reels will stop. Then
the STOP/EJECT button should be p
ressed.
Pause
Press the PAUSE button to momentarily
suspend tape travel during
recording or
playback. Re-p
ress the PAUSE button to
release pause and recording or playback
restart. Pause control does not function
during fast forwa
rd or rewind.
CASSETTE PLAYBACK (DECK B) (DECK A)
This unit enables you to play continuously
from DECK B to DECK A.
1. Press the POWER switch to ON.
2. Set the FUNCTION selector to TAPE.
3. Insert pre-recorded cassettes to DECK
A and DECK B compartme
nts.
4. Press the PAUSE button and PLAY
button of DEC
K B.
5. Press the PAUSE button and PLAY
button of DEC
K A.
6. Rele
ase the PAUSE button of DECK B,
DECK B will start playing.
When DECK B reaches the end of the tape.
DECK B will automatically stop and then
DECK A will start playing automaticall
y.
7. Adj
ust the VOLUME & EXTRA BASS
controls to the desired sound level and
sound equalization.
This unit has an ALC (Automatic Level
Cont
rol) circuit and no further adjustment of
the controls is necessary while recording.
1.
Press the POWER switch to ON.
2. Set the desired FUNCTION selector
acco
rding to the source to be recorded.
3.
Press the STOP/EJECT button to insert
a blank tape.
4. Press the RECORD/PLAY button to
start
recording.
5. Since you can monitor th
rough the
speakers regardless of the recording
level, adjust the VOLUME & EXTRA
BASS cont
rols to the desired sound
level and sound equalization.
6.
Press the STOP/EJECT button to stop
recording at any time. When the end of
the tape has been
reached, the
automatic stop will be activated.
Note:
Noise may be heard if recording from AM
Ra
dio station, to reduce this noise please press
the Beat Cut Switch.
Erasing
To erase the recording tape without making a
new recording, let the unit operate in the
recording mode.
Note:
Do not opearate the DECK B while erasing
CONTINUOUS PLAYBACK (DECK B) TO (DECK A)
RECORDING (DECK A)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster CDMP 9933PRT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster CDMP 9933PRT in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info