812372
19
Zoom out
Zoom in
Previous page
1/24
Next page
Recooling
In the system hydraulics with solar, excess energy is guided from the storage back to the collector with an activated return cooling function.
This only occurs if the temperature in the storage is greater than the value “Return cooling Tref” and the collector is at least 20 °C colder
than the storage and until the storage temperature has fallen below the value “Return cooling Tref”. For muti-storage systems, the return
cooling applies to all storage.
Energy is lost through the collector through this function! The recooling should only be activated in cases of exception, with low
heat acceptance, for example, during vacation.
Anti-Legionella
The anti-legionella function is an additional function for certain relay functions such as: electric heating rod, burner, circulation,
compressor.
With the help of the anti legionella function (hereinafter referred to as: AL), the system can be heated up at selected times in order to free it
of legionella.
In the delivery state, the anti legionella function is switched off.
Antilegionella function is not shown in the menu “Protective functions”. It is instead shown as submenu of the corresponding
special function. Special functions with AL include: Solar, burner, circulation and compressor.
As soon as it has heated up with “AL” turned on, information with the date will be shown in the display.
This anti legionella function does not offer any secure protection against legionella, because the controller requires an
adequate added amount of energy and the temperatures cannot be monitored in the entire storage area and the connected
pipe system.
During the operation of the anti legionella function, if applicable, the storage is heated above the set value “Tmax”, which may
lead to scalding and system damage.
7. Special Functions
Used to set basic items and expanded functions.
The settings in this menu should only be changed by a specialist.
Program selection
Here the hydraulic variation fitting to the respective use case is selected and set.
The program selection normally occurs only once during the first entry into service by a specialist. An incorrect program selec-
tion may lead to unpredictable errors.
Signal
In this menu, the preset profiles for the signal can be selected or under “manual” all settings can be done personally. The settings can still
be changed after a profile has been selected.
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel STDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel STDC in the language / languages: English as an attachment in your email.

The manual is 2.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel STDC

Sorel STDC User Manual - German - 26 pages

Sorel STDC User Manual - Dutch - 48 pages

Sorel STDC User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info