812376
18
Zoom out
Zoom in
Previous page
1/28
Next page
Anti Legionella
With the help of the anti legionella function (hereinafter referred to as: AL), the system can be heated up at selected times in order to free
it of legionella.
In the delivery state, the anti legionella function is switched off.
As soon as it has heated up with “AL turned on, information with the date will be shown in the display.
This anti legionella function does not offer any secure protection against legionella, because the controller requires an
adequate added amount of energy and the temperatures cannot be monitored in the entire storage area and the connected
pipe system.
During the operation of the anti legionella function, if applicable, the storage is heated above the set value “Tmax”, which may
lead to scalding and system damage.
AL Tset
For a successful heating, this temperature has to be reached at the AL sensor(s) for the exposure time period.
AL residence time
For this period of time the AL Tsettemperatures at the activated AL-sensors have to be reached for a successful heating.
Last AL heat
This displays when the last successful heating has occurred.
AL sensor 1
On this sensor, the temperature of the AL function is measured.
AL Sensor 2
Optional AL sensor
If this sensor is set for a successful heating Tset AL have to be achieved at this sensor too for the action time.
AL-times
During this periods the AL heat up is attempted. If within the defined period, the AL-condition is met (Tset at the defined sensors for the
exposure time period), the heating is completed and logged as "Last AL heating".
System protection
Priority protection function
The system protection should prevent an overheating of the components installed in the system through the forced shut down of the
solar circulation pump. If the value “AS Ton on the collector has been exceeded for 1 Min. the pump will be turned off and not turn on
again in order to protect the collector, for example, from steam. The pump will only be switched on again, when the collector temperature
falls below “SP Toff”.
With the system protection (on), there are increased standstill temperatures in the solar collector and therefore an increased
pressure in the system. The operating manuals from the system components must be observed.
Collector protection
Priority protection function
The collector protection prevents the collector from overheating. A forced switching of the pump makes sure that the collector is cooled
through the storage. If the value “KS Ton is exceeded on the collector, the pump will be turned on in order to cool the collector. The
pump is shut down if the value “KS Toff on the collector is not met or the value “KS Tmax Sp.” on the storage or KS SB Max on the pool
is exceeded.
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel MTDC-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel MTDC-E in the language / languages: English as an attachment in your email.

The manual is 3.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel MTDC-E

Sorel MTDC-E User Manual - German - 26 pages

Sorel MTDC-E User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info