812376
17
Zoom out
Zoom in
Previous page
1/28
Next page
Sensor auxiliary heating
sensor
The reference sensor for the auxiliary heating can be changed here.
Sensor 2 auxiliary heating
Optional sensor 2
The optional sensor for auxiliary heating can be set here.
If an optional sensor is set for the function, then "sensor" is the switch-on sensor and "sensor 2" is the switch-off sensor.
Procedure: If Tset is fallen below at the defined sensor of the function, the function starts until Tset + hysteresis at
sensor 2 is exceeded.
Teco
For a solar charge, Teco is used instead of Tsoll for the auxiliary heating.
Energy Saving Mode
In economy mode, the setpoint for the auxiliary heating is set to Teco during a solar charge in order to delay the activation of the aux-
iliary heating.
Periods
The desired time periods in which the auxiliary heating is enabled are set here. For each weekday, three times can be specified, fur-
thermore, you can copy individual day to other days. Outside the set times the auxiliary heating is disabled.
Field cooling
This function controls an external cooling unit to cool down the collector.
Tmax field
If this temperature is exceeded at the reference sensor of the field cooling, the relay is switched on.
Hys min
When the temperature at the reference sensor of the field cooling falls below Tmax field +Hys min, the relay is switched off.
Hys max
To protect the cooling unit itself from damage, the relay is switched off as soon as the temperature at the reference sensor of the field
cooling reaches Tmax field + Hys max.
Field cooling sensor
Reference sensor of the field cooling function.
This function does not activate the solar pump to cool the collector via the storage. Therefore, please activate the collector
protection in the protection functions.
5. Protective Functions
The 'Protective functions‘ can be used by specialists to activate and set various
protective functions.
By no means does the controller replace the safety appliances on site!
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel MTDC-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel MTDC-E in the language / languages: English as an attachment in your email.

The manual is 3.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel MTDC-E

Sorel MTDC-E User Manual - German - 26 pages

Sorel MTDC-E User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info