Manual Solo 879 (page 65 of 160) (English, German, French, Spanish)

655955

Zoom out

Zoom in

1/160

Power tool use

ENGLISH 25

Always observe all safety notes and all other information in all chapters of these operating

instructions for any work!

Check list for use (keywords only!) .................................................. Î

x Before start-up:

– Power tool in an operationally safe condition! ........................ ÎOperating instructions complete

– Prescribed work clothes ......................................................... ÎChap. 3.3, page 7

– Working area inspected and secured ..................................... Î Chap. 3.2, page 6, and

chap. 3.9, page 10

– Correct cut-off wheel firmly installed. ..................................... ÎChap. 5.1, page 16, and

chap. 7.1, page 25

– Wheel guard in best position .................................................. ÎChap. 5.4, page 18

– Cutting device position, preferably centre position ................. Î Chap. 5.8, page 21

– Ribbed belt tension correct ..................................................... Î Chap. 5.6, page 20

– Tool properly fuelled ............................................................... Î Chap. 5.5, page 18

x Starting: ........................................................................................ ÎChap. 6 complete, page 24

x During work – generally safe work: .............................................. Î Operating instructions complete

– Check idle settings ................................................................. Î Chap. 8.3, page 31

– Inspecting the working situation ............................................. Î Chap. 3.9, page 10,

Chap. 7.2, page 26, and

Chap. 7.3, page 27

– Wet cutting preferred .............................................................. ÎChap. 5.7, page 20

– Secure working technique ...................................................... ÎChap. 7.3, page 27,

chap. 7.4, page 27, and

chap. 7.5, page 28

– Operating and maintenance notes complete .......................... Î Chap. 8 complete, as of page 29

 Air filter clean .................................................................... ÎChap. 8.4, page 32

x After work: .................................................................................... Î Operating instructions complete

– Cleaning and care .................................................................. ÎChap. 8.1, page 29

– Secure storage of power tool ................................................. ÎChap. 8.11, page 38

– Maintenance ........................................................................... Î Operating instructions complete

Only use cut-off wheels that correspond to the standards ANSI B7.1, EN 12413 and EN 13236 and

that are undamaged.

The maximum spindle speed of the power tool is 4,550 min

-1

[4,550 rpm].

Only use high speed reinforced cut-off wheels marked with a permissible maximum operating speed

of at least 4,550 min

-1

[4,550 rpm].

For processing of metals (hot cutting) and processing of mineral materials (cold cutting), different cut-off

wheels are offered. Only use cut-off wheels approved for the material being cut.

Diamond cut-off wheels are only approved for cutting mineral materials. When installing the diamond

cut-off wheel, always observe the rotating direction indicated on the diamond cut-off wheel; otherwise, the

cutting effect will reduce quickly from diamond loss.

7 Power tool use

7.1 Cut-off wheels

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 879 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 879 Manual

Product: