655955
63
Zoom out
Zoom in
Previous page
1/160
Next page
Preparing for use
ENGLISH 23
Move water supply line attachment upwards
The water supply line must be placed so
that contact between water supply line and
cut-off wheel in operation is excluded in all
positions of the wheel guard.
x Place the water supply line so that it runs on the
outside of the wheel guard and not between the
wheel guard and the assembly flange.
x Push the attachment screws (a) of the water
supply line into the adapter pieces (b).
x Place the adapter pieces on the right and left
sides of the wheel guard above the associated
threaded holes (p) and screw in the water supply
line attachment screws.
x Loosen the screw (q) of the clamp (r) until the clamp can be moved upwards at the blank spar of the top
handle (s).
x Push the clamp upwards so far that the water supply line can never be in contact with the cut-off wheel.
x Check placement of the water supply line when the wheel guard is rotated all the way to the front and
correct if required.
Install handle for wheel guard adjustment and cut-off wheel again
x Install the handle for wheel guard adjustment (3) again to the wheel guard with the respective
attachment screws.
x Install the cut-off wheel: Î Chap. 5.1, page 16
After production, the power tool is subjected to an inspection and test process that ensures that the motor
is then run in perfectly.
Therefore, no special measures are required for initial start-up.
5.9 Initial starting / run-in behaviour
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 879 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 879 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info