619670

Snooper Lynx Manual

15
Zoom out
Zoom in
Previous page
1/22
Next page
15
Return to contents
Highlight your desired option (‘ON’ or ‘OFF’) by pushing the ‘UP/DOWN’ button upwards or downwards.
Once you have highlighted your desired setting press the ‘OK’ button. The unit will display ‘Setting Conrmed’ indicating the
setting has been saved.
Note: If voice alerts are turned ‘OFF’ the unit will alert you to the location of a Fixed Speed Safety camera by a series of beeps.
The visual display will remain the same.
7. User Points
It is possible to add and edit your own personal locations on Lynx. To add a new location
make sure you are stationary and parked in a safe, legal manner then press the ‘Target’
button, highlight ‘Save to Device’ by pressing the power button twice then press the
‘Target’ button to store the location.
NOTE: If you save a user point to the device it will not be shared with other Lynx
users.
To view your saved coordinates:
Press the ‘OK’ button when ‘User Points’ is displayed in the menu options.
‘Edit’ is highlighted by default. Press the ‘OK’ button to view or edit your stored coordinates.
To scroll through the user points you have stored push the ‘MENU’ button to select the user point.
To edit the user point:
Once you have selected the user point that you wish to edit push the ‘UP/DOWN’ button downwards – ‘CAM TYPE’ will be selected.
Push the ‘MENU’ button until the correct camera type is displayed.
Push the ‘UP/DOWN’ button downwards – ‘LIMIT’ will be highlighted. Push the ‘MENU’ button until the correct speed limit for that
location is displayed.
Push the ‘UP/DOWN’ button downwards – ‘SPD TYPE’ will be highlighted. Push the ‘MENU’ button to select either ‘MPH’ or ‘KMH’
Once you have made your changes press the ‘OK’ button. The unit will display ‘Setting Conrmed’ to indicate the changes have
been saved.
Troubleshooting – Saving New Coordinates
When you attempt to save a new coordinate but the display reads ‘Weak Signal!’ it means that Lynx is not receiving sucient signal
strength to plot the position. Please ensure that Lynx has a clear view of the sky, the unit is displaying the standby screen and then
try again.
When you attempt to save the new coordinate and the display reads ‘Memory Full’ it means that the memory in Lynx is completely
full. If you want to store any new coordinates you will have to either delete some or all of the existing coordinates stored in the unit’s
memory.
Deleting Stored Coordinates
If you would like to delete any of the coordinates you have stored in your units memory:
Press the ‘OK’ button when ‘User Points’ is displayed in the menu options.
To delete individual user points highlight ‘Delete’ by pushing the ‘UP/DOWN’ button downwards. Once ‘Delete’ is selected press the ‘OK’
button.
Push the ‘UP/DOWN’ button to scroll through the stored user points. Once the coordinates you wish to delete are visible on the
display, press the ‘OK’ button.
A new screen will be displayed asking you to ‘Conrm Delete?’. If you wish to delete the coordinate highlight ‘Yes’ and then press
the ‘OK’ button. If you do not wish to delete the coordinate highlight ‘No’ and then press the ‘OK’ button.
User Points
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper Lynx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper Lynx in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info