621561
79
Zoom out
Zoom in
Previous page
1/84
Next page
79
v1.06
Admin and Installation Guide M700, M300 Description of Settings
Setting Description
MAC address The media access control (MAC) address is a unique identier assigned by the
manufacturer. Printed on device's label and on Home page of web interface.
IP address The Internet Protocol address assigned by the network the base station is
located in.
IP status Current base station status in the SME network.
This unit: Indicates that you are looking at this base station's web interface.
Connected: The base station is online in the network.
Connection lost: The connection to the base station has been lost.
DECT sync source The drop-down menu contains the RPNs of each of the currently connected
base stations followed (in parentheses) by the strength of the respective radio
signal (RSSI) in dBm, as received by the base station whose web interface you
are currently accessing. The maximum number of multicell chain levels is 12.
When the DECT system setting Auto congure DECT sync source tree is
set to "enabled", the sync source tree will be generated automatically.
When the setting is "disabled", the sync source tree must be congured
manually by selecting each base station's sync source from the drop-
down menu.
The visible option shows which sync source each of the base stations in the
DECT chain is currently using. If you select a dierent option, the chain must
be rebooted. Options:
Select as primary: This option is visible when the base station is selected
as the primary. Select from the drop-down menu of a secondary base
station to make that base station the primary.
Primar y:RPNxx (-xxdBm): This option is visible when the base station is
a secondary level base station whose sync source is the primary.
Example: Primary:RPN00 (-72dBm)
Levelx: RPNxx (-xxdBm): This option is visible when the base station is a
secondary level base station whose sync source is another secondary
level base station.
Example: Level1:RPN04 (-68dBm)
(any) R PN: Indicates a base station that is not synchronized to any other base
station.
DECT property Base station characteristics in connection to the current multi cell network.
Possible output(s):
Primary: Primary base station all other nodes in the chain synchronize to.
Locked: The base station is currently synchronized and locked to the
primary.
Searching: The base station is in the process of locating to a DECT sync
source.
Free Running: A locked base station that suddenly lost synchronization to
the primary.
Cell empty: No current connection information from base station.
Assisted lock: Base station has lost DECT sync source, and Ethernet is
used for synchronization.
Sync. Lost: Handset has an active DECT connection with the base station
but the base station has lost connection to DECT sync source. The base
station will continue to work as long as the call is active, then go into search
mode when the call is terminated.
Base station name Base station name that was assigned to the base station in the Management
settings and that also appears at the top of its web interface, within the base
station group, and in the DECT chain of a multicell installation.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 2.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 44 pages

Snom M300 User Manual - English - 38 pages

Snom M300 User Manual - English - 58 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info