621561
84
Zoom out
Zoom in
Previous page
1/84
Next page
84
v1.06
Admin and Installation Guide M700, M300 Description of Settings
Setting Description
Repeater
Idx/name Idx and - if set - name assigned to repeater in Repeaters settings
Operation Total operation time since last reboot or reset.
Busy The number of times the repeater was busy.
Busy duration The total time that the repeater was been busy for speech (5 or more calls
active).
Max active The maximum number of calls that have been active at the same time.
Searching The number of times the repeater has searched for its sync source.
Recovery When the repeater has lost its sync source, it will attempt to lock onto another
base station or repeater. Statistics show recovery mode.
DECT source changed The number of times the repeater has changed its sync source.
Wideband The number of wideband calls on repeaters
Narrowband The number of narrowband calls on repeaters
DECT
Slot 0 - 11 12 time slots for transmitting audio
Frequency 0 - 9
Conguration
This page shows the current settings of the base station; they can be copied into a le, but not edited.
To load a new conguration, click on Browse and select the le, then click on Load. To export the
settings, click on Export.
For information on how to provision the conguration, see the "Provisioning Guide M900_M700_M300"
at https://service.snom.com. Select DECT, then M700 Base Station.
Syslog
This page shows the live feed of system level messages of the current base station. The messages
shown here depend on the syslog settings congured on the Management page. To dump the log, use
the copy-and-paste function of your PC operating system to transfer the contents to a data le. If you
are using Windows, press Ctrl+S, select a le location and a le type in the pop-up window, name the
le, and click on Save.
SIP Log
This page shows server-related messages that are logged during the operation of the SME system.
To dump the log, use the copy-and-paste function of your PC operating system to transfer the
contents to a data le. If your are using Windows, press Ctrl+S, select a le location and type in the
pop-up window, name the le, and click on Save.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 2.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 44 pages

Snom M300 User Manual - English - 38 pages

Snom M300 User Manual - English - 58 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info