459425
24
Zoom out
Zoom in
Previous page
1/40
Next page
45
10
Tournez le volant vers vous jusqu'à ce que
l'aiguille soit dans la position la plus haute.
AUTO
Points zigzags
Abaissez le pied presseur.
Baje la palanca del prensatelas
Relevez le pied presseur et
mettez le tissu sous le pied presseur.
Largeur du point
Pour coudre des points très serrés,
réglez la longueur du point sur un petit
nombre, par ex. sur « 2 ». Pour
appliqué, régler sur « 0,5 » ou
moins. Pour obtenir un point plus long,
réglez sur un nombre plus grand, par
ex. sur « 5 ».
Longueur du
point
Para una puntada muy cerrada, ajuste el
largo de puntada a un número inferior,
como “2”. Para aplicaciones ajuste a
“5” o menos. Para una puntada más larga
ajuste a un número mayor, como “5”.
Sélecteur de point
Tension du fil d'aiguille
Remarque : n'importe laquelle des trois positions d'aiguille
peut être sélectionnée.
Position de l'aiguille
Selector de posición de la aguja
Nota: Cualquiera de las tres posiciones de la aguja puede
seleccionarse cuando se cose con puntada recta.
Selector de largo
de puntada
Selector de tensión del hilo
Selector de puntadas
Selector de ancho de puntada
Gire el volante hacia usted hasta que la aguja
esté en la posición más alta.
Levante la palanca del prensatelas y coloque
la tela debajo del prensatelas.
Puntada Zigzag
Note: Any of the needle positions can be selected.
Needle position
For a very close stitch, set the Stitch
Length dial at a smaller number, such as
“2”. For appliqueing set “0.5” or below.
For a longer stitch, set at a higher
number, such as “5”.
Stitch length dial
Pattern selector dial
Turn handwheel counter clockwise until the
needle is in the highest position.
Raise presser foot lifter and slide fabric under
the presser foot.
Lower the presser foot.
Zig-zag Stitching
Stitch width
0
5
4
3
1
2
Start with the Needle thread
tension in Auto position.
9
44
Bâtir
Relevez le releveur de pied presseur et retirez le tissu en le
faisant glisser sous le pied presseur. La couture est très
lâche et peut être facilement retirée.
Tournez le volant vers vous jusqu'à ce que l'aiguille soit
dans la position la plus haute.
Cousez
Continuez la couture jusqu'à la fin.
Comience a coser.
Continúe cosiendo hasta terminar la costura.
Gire el volante hacia usted hasta que la aguja
esté en la posición más alta.
Levante la palanca del prensatelas y retire la tela debajo
del prensatelas.
Hilvanado
Sew
Continue sewing until finished.
Turn handwheel counter clockwise until the needle is in the
highest position.
Raise presser foot lifter and slide fabric from under the presser
foot. The stitch is very loose and can easily be pulled out.
Basting
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 4220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 4220 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info