459425
23
Zoom out
Zoom in
Previous page
1/40
Next page
43
9
Bâtir
Abaissez le pied presseur.
Tournez le volant vers vous jusqu'à ce que
l'aiguille soit dans la position la plus haute.
Relevez le releveur du pied presseur et
mettez le tissu sous le pied presseur.
Largeur du point
Pour bâtir, régler la longueur de point
sur « 5 ».
Longueur du
point
Para hilvanar ajuste el largo de puntada
a "5".
Sélecteur de point
Tension du fil d'aiguille:
poussez vers le signe (-)
Remarque : n'importe laquelle des trois positions d'aiguille
peut être sélectionnée pour la couture au point droit.
Position de l'aiguille
Selector de posición de la aguja
Nota: Cualquiera de las tres posiciones de la aguja puede
seleccionarse cuando se cose con puntada recta.
Selector de largo
de puntada
Selector de tensión del hilo
Presione a negativo(-)
Selector de puntadas
Selector de ancho de puntada
Gire el volante hacia usted hasta que la aguja
esté en la posición más alta.
Levante la palanca del prensatelas.
Baje la palanca del prensatelas.
Hilvanado
Note: Any of the three needle positions can be selected when
sewing a straight stitch.
Needle position
Stitch width
For Basting set Stitch length to “5”.
Stitch length Dial
Pattern selector Dial
Needle thread tension
Push to Negative (-)
Turn handwheel counter clockwise until the
needle is in the highest position.
Raise presser foot lifter and slide fabric under
the presser foot.
Lower the presser foot.
Basting
AUTO
2
0
5
4
3
1
42
8
Points droits
Commencer la couture.
Cousez cinq ou six points, puis arrêtez.
Appuyez sur le bouton de marche arrière et maintenez-le
ainsi. Cousez. La machine coud alors en marche arrière,
renforçant ainsi la couture. Piquez cinq ou six points, puis
relâchez le bouton de marche arrière.
Tournez le volant vers vous jusqu'à ce que l'aiguille soit
dans la position la plus haute. Relevez le pied
presseur et retirez le tissu en le faisant glisser sous le
pied presseur.
Continuez la couture. À la fin, renforcez la couture
en appuyant à nouveau sur le bouton de marche
arrière.
Comience a coser.
Cosa 5-6 puntadas, luego deténgase.
Mantenga presionado el botón de retroceso, y cosa.
La maquina coserá en reversa, reforzando la puntada. Cosa
5-6 puntadas luego libere el botón de retroceso.
Continúe cosiendo. Al final, refuerce la puntada
presionando de nuevo el botón de retroceso.
Gire el volante hacia usted hasta que la aguja esté
en la posición más alta, levante la palanca del
prensatelas y retire la tela debajo del prensatelas.
Puntada Recta
Begin sewing.
Sew 5-6 stitches, then stop.
Hold the reverse button down, and sew.
The machine will sew in reverse, reinforcing the
stitching. Sew 5-6 stitches then release the reverse
button.
Continue sewing. At the end, reinforce the stitching
by pushing the reverse dial again.
Turn handwheel counter clockwise until the needle is in the
highest position, raise the presser foot lifter and slide fabric from
under the presser foot.
Straight Stitching
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 4220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 4220 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info