621496

Simrad Robertson AP300X Marine Autopilot Manual

103
Zoom out
Zoom in
Previous page
1/132
Next page
Installation
22081814H 101
Abbreviated
name
Description / Usage NOTES
RFC For use when selecting between
Robertson fluxgate compasses
RFC : J300X, RFC35 compass
connected to junction unit
RFC : RFC300, RFC300 compass
connected to ROBNET
MAGN For use with magnetic compass
(APC100) with course detector
(CD100)
MAGN : J300X, CDI35 + CD100
connected to junction unit.
MAGN : CI300X, CD100 connected
to CI300X
FLUXG For use with non-Robertson
fluxgate compasses that output
SIN/COS
Optional CI300X item. Only
available if WIND has not been set
to CI300X
GYRO For use with Robertson RGC50,
RGC10 gyro
Optional CI300X item. True data
displayed for HDG, COG, bearing
to waypoint
Output
INSTR
For high speed NMEA output
of compass heading
HDM or HDT output increased
from 1 to 5 times/sec. on TX1 port
Output
RADAR
Clock/data heading output to
radars
Selectable between Anritzu and
Furuno. (On both J300X and
NI300X)
The Interface Setup Menu presents these names so that they can be
assigned to a hardware input or output port. Each abbreviated name is
then presented in appropriate locations of the USER SETUP MENU to
provide the user with choices of data sources, or identified to the
AP300X where to look for various types of data.
When you assign a hardware port to an abbreviated name, you are
simply telling the AP300X system that when the user chooses an
abbreviated name as a data source it should look to the hardware port
assigned to the abbreviated name for the data.
It is recommended that upon completion of the ISM that the
configuration be recorded in the Interface Setup Table on page 100.
• Enter the Interface Setup part of the ISM by pressing and holding
the NAV/ Setup button for five seconds.
• Scroll through to the Interface setup ? prompt by pressing the
STBD [>]
The following display will be presented:
Setup?
Interface
INSTALLATION
To access the Interface Setup items, turn the course selector clockwise.
The display will show:
… 103 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad Robertson AP300X Marine Autopilot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad Robertson AP300X Marine Autopilot in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info