621496

Simrad Robertson AP300X Marine Autopilot Manual

102
Zoom out
Zoom in
Previous page
1/132
Next page
Robertson AP300X Autopilot
100 22081814H
Master Reset
of memories?
Master reset
INSTALLATION
Note ! A Master Reset is part of the final test at factory and will reset the memories
to factory settings. Unless you need to clear all stored values during the
installation setup procedure, you should not perform a Master Reset.
The Master Reset needs a double confirmation to prevent an unwanted reset.
To perform a Master Reset, rotate the course selector clockwise and observe the
display; then rotate the course selector counter clockwise.
Interface Settings
The AP300X system provides a totally flexible approach to the input of
data from optional equipment. Identification of the type of equipment
connected to the AP300X system is performed in the Interface Setup
Menu.
If your system includes connection of external equipment to the
NMEA0183 data ports in Junction Unit or NI300X, or if the CI300X is
installed with optional compass units or an optional analog wind vane
unit, they must be configured under this menu. This procedure allows
you to assign an abbreviated name to identify the type of equipment
that is connected to each of the available hardware ports in the AP300
system.
Abbreviated
name
Description / Usage NOTES
GPS1 Primary GPS
GPS2 Backup GPS
LC 1 Primary Loran
LC 2 Backup Loran
Can be used as either NAV source
or POS source. Also for VTG data
for automatic AUTO HI/LO speed
selection
NAV1 Chart plotter
NAV2 Other Nav source like Decca
etc.
WIND Source of wind data for wind
instrument and wind sailing.
Wind speed and angle from
Junction Unit, NI300X or CI300X
(No speed)
INSTR Source of data for instrument
displays. Also for automatic
HI/LO parameter selection
Uses log input (VHW) for speed
data and either DBK or DBT for
depth data
… 102 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad Robertson AP300X Marine Autopilot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad Robertson AP300X Marine Autopilot in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info