Manual Silvercrest SNMD 33 A1 - IAN 100138 (page 13 of 50) (English, German)

597358

Zoom out

Zoom in

1/50

Important:

Set the main switch (20) to ("O").

Raise the presser foot bar by lifting the

two-step presser foot lifter (18) and lift

the thread lever (1) by turning the

hand wheel (21) anti-clockwise. Follow

the arrows and numbers on the

sewing machine when threading.

1. Place cushion (h)

thread spool pin (15)

of thread thread

2. Guide the upper thread through the

upper thread guide (16) from right to

left, then move it forward into the right

slot and guide it downwards.

3. Guide it to the left under the guide lug

(A) and then upwards again.

4. Guide the thread from right to left

through the thread lever (1) and then

downwards.

5. Guide the thread first behind the large,

metal thread guide (B) and then

through the eye of the needle. Always

thread the needle from the front.

the felt on the left

. Place the spool

(m) on the same spool

pin (15).

GB/MT 13

Threading the upper thread

Getting ready

Needle threader

You can use the needle threader (f) as a

threading aid.

1. Insert the needle threader (f) through

the eye of the needle from back to

front.

2. Guide the upper thread through the

wire loop of the needle threader.

3. Pull the needle threader (f) together

with the thread back through the eye of

the needle.

The cotton coming from the spool,after 2 stitches bunches up and machine stops.The handwheel is also very tight.I am new to sewing but think I have everything threaded up correctly.Thankyou Fran Submitted on 21-1-2022 at 12:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 100138 in the language / languages: English, German as an attachment in your email.

The manual is 2,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNMD 33 A1 - IAN 100138 Manual

Product: