597358

Silvercrest SNMD 33 A1 - IAN 100138 Manual

11
Zoom out
Zoom in
Previous page
1/50
Next page
The thread spool pins (C, D) serve to
hold the thread spools in place while
thread is being fed to the sewing machine.
To use the spool pin, pull it upwards. To
store it, push it down.
Note:
If you are using thread which tends to
wraps itself around the spool pin, put
the thread on the thread spool pin (C)
and guide the upper thread (A) through
the eye (B) in the thread spool pin (D),
see Fig. The eye (B) should point in
the direction of the thread spool.
C
D
E
a
E
p
B
A
12
3
4
GB/MT
11
Attaching the presser foot holder
Important:
1. Install the presser foot holder
2. Inserting the presser foot
3. Removing the presser foot
4. Inserting the edge/ quilt guide (p)
Turn the main switch (20) to off ("O")
when carrying out all the operations!
Raise the presser bar (A) by lifting the
two-step presser foot lifter (18) Attach
the presser foot holder (B) as
illustrated.
Lower the presser foot bar (B) until the
groove (C) is directly above the pin (D).
Lower the presser foot bar (A) as far
as it will go. The presser foot (a) will
engage automatically.
Raise the presser foot.
Press the lever (E) gently towards the
front and the presser foot disengages.
As shown in the illustration carefully
insert the edge/ quilt guide (p) e.g. For
hems, pleats, etc.
Getting ready
C
D
A
B
C
D
Setting up the thread spool pins
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-snmd-33-a1---ian-100138

Reset search

  • The cotton coming from the spool,after 2 stitches bunches up and machine stops.The handwheel is also very tight.I am new to sewing but think I have everything threaded up correctly.Thankyou Fran Submitted on 21-1-2022 at 12:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SNMD 33 A1 - IAN 100138 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 100138 in the language / languages: English, German as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info