597358

Silvercrest SNMD 33 A1 - IAN 100138 Manual

15
Zoom out
Zoom in
Previous page
1/50
Next page
Note twin needle:
1. Twin needles are used for decorative work.
2. When sewing with twin needles, the stitch width dial (4) should be set at "2.5".
3. The European needle size is 65, 70, 80 etc. The American and Japanese needle size is 9, 11, 12
etc.
4. Replace the needle regularly and not later than the first thread breakage or skipped stitches.
NEEDLE, FABRIC, THREAD SELECTION GUIDE
IMPORTANT: Match needle size to thread size and weight of .fabric
Matching the needle, fabric and thread
NEEDLE SIZE
9-11(65-75)
12(80)
14(90)
16(100)
18(110)
Lightweight fabrics: thin cottons, voile, serge, silk,
muslin, Qiana, interlocks, cotton knits, jerseys,
crepes, woven polyester, shirt & blouse fabrics.
Medium weight fabrics-: cotton, satin, heavy
muslin, sailcloth, double knits, light woollens.
Medium weight fabrics: cotton duck, woollens,
heavier knits, terrycloth, denims.
Heavyweight fabrics: canvas, woollens, canvas
and quilted fabrics, denims, upholstery material
(light and medium).
Heavy woollens, overcoat fabrics, upholstery
fabrics, some leathers and vinyls.
Light-duty thread in cotton,
nylon or polyester.
Most threads sold are medium
size and suitable for these
fabrics and needle sizes. Use
polyester threads on synthetic
materials and cotton on natural
woven fabrics for best results.
Always use the same thread on
top and bottom.
Heavy duty thread, carpet
thread (set the presser foot to
high pressure-high numbers.)
FABRICS THREAD
Sewing / Useful applications
Sewing (A)
Stitching (B)
Releasing the material (C)
Cutting the thread (C)
Once the sewing machine is correctly
threaded and adjusted, lower the presser
foot before sewing by lowering the two-
step presser foot lifter (18). Press the
control pedal (r) to start sewing.
At the end of seam, press down the
reverse sewing lever (8). Sew a few
reverse stitches. Release the lever and
the machine will begin to sew forwards
again.
Turn the hand wheel (21) anticlockwise to
put the thread lever (1) into its highest
position. Lift the presser foot and pull the
material back in order to release it.
Hold the threads behind the presser foot
with both hands; guide them to the thread
cutter (12) and move your hands down.
GB/MT 15
Sewing basics
8
A
1
12
C
B
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-snmd-33-a1---ian-100138

Reset search

  • The cotton coming from the spool,after 2 stitches bunches up and machine stops.The handwheel is also very tight.I am new to sewing but think I have everything threaded up correctly.Thankyou Fran Submitted on 21-1-2022 at 12:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SNMD 33 A1 - IAN 100138 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 100138 in the language / languages: English, German as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info