Manual Silvercrest SNMD 33 A1 - IAN 100138 (page 14 of 50) (English, German)

597358

Zoom out

Zoom in

1/50

Lower thread tension (B)

Note:

The bobbin tension is adjusted

correctly during manufacturing,

therefore no changes are necessary.

To test the bobbin thread tension, the full

bobbin is placed in the bobbin case. The

bobbin case and gripper are then

suspended by the end of the thread. If the

tension is correct, the thread will unwind

by about 5 to 10 cm. when gently swung

and will then remain suspended. If the full

bobbin case unwinds, the tension is too

slack. If the tension is too tight, it hardly

unwinds or does not unwind at all. To

adjust, use the small screwdriver (I).

GB / MT

Thread tension

Upper thread tension (A)

Basic upper thread tension setting:

"AUTO"

To increase the tension, turn the dial to

the next higher number. To reduce the

tension, turn the dial to the next lower

number.

1. Normal thread tension

2. Upper thread tension too loose

3. Upper thread tension too tight

Bringing up the lower thread

Hold the end of the upper thread with the

left hand. Turn the handwheel (21) in the

anticlockwise direction until the needle is

again raised (a complete revolution).

Pull on the upper thread to bring the

lower thread up through the stitch plate

hole. Lay both threads to the back under

the presser foot.

Getting ready

The cotton coming from the spool,after 2 stitches bunches up and machine stops.The handwheel is also very tight.I am new to sewing but think I have everything threaded up correctly.Thankyou Fran Submitted on 21-1-2022 at 12:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 100138 in the language / languages: English, German as an attachment in your email.

The manual is 2,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNMD 33 A1 - IAN 100138 Manual

Product: