575429

Silvercrest SKF 2300 B2 - IAN 75818 Manual

75
Zoom out
Zoom in
Previous page
1/84
Next page
72
SKF 2300 B2
GB
If you do not use the deep fryer regularly it is recommended that, after cooling,
the oil or liquifi ed fat is poured into a well sealed container and stored in the
refrigerator or a cool storeroom. Fill the container through a sieve, in order to
remove any food particles from the oil or fat. Solid fats must still be in a liquid
state so that they can be poured.
Changing the frying oil or fat
Change the oil fi rst when it has completely cooled down. Solid fats must still be
in a liquid state so that they can be poured.
1) Open the appliance lid by pressing on the lid release button 6.
2) Remove the frying basket 3.
3) Remove the control/heating element
5.
4) Place the operating/heating element
5 at a clean and dry location.
5) Carefully remove the stainless steel container
4 with the oil or fat from the
deep fryer.
6) Pour the oil or fat into suitable containers, for example bottles. For this, use
the pouring runnel at the corner of the stainless steel container
4.
NOTICE
The disposal of cooking oils and fats is regulated diff erently in every community
or town. Frequently, it is not permitted to dispose of such oils or fats with normal
household refuse. Make enquiries at your local community administration offi ce
about suitable disposal sites.
7) Thoroughly clean all parts of the deep fryer as described in the chapter
“Cleaning and Care”.
8) Refi ll the deep fryer with fresh oil or fat as described in the chapter “Frying”.
Cleaning and Care
WARNING - RISK OF ELECTRIC SHOCK!
► Always remove the plug from the mains power socket before you clean the
appliance.
► UNDER NO CIRCUMSTANCES may the appliance or parts of it be
submersed in liquids! This could result in you receiving a fatal electric shock
and the appliance could be damaged.
► Never open the appliance housing.
IB_75818_SKF2300B2_LB2.indb 72IB_75818_SKF2300B2_LB2.indb 72 27.08.12 11:2227.08.12 11:22
… 75 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2300 B2 - IAN 75818 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 B2 - IAN 75818 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info