575429
74
Zoom out
Zoom in
Previous page
1/84
Next page
71
SKF 2300 B2
GB
Timer
You can programme in a countdown of up to 60 minutes with the timer q:
1) Press the button “
” on the Timer q to switch it on.
2) Press the buttons “+” and “-” to set the desired time in minutes.
3) Press on the button “
” to start the countdown of the time. The programmed
time will blink twice to indicate that the countdown of the time has begun.
Signal tones sound on completion of the countdown.
4) The signal tones will stop when you once again press the button “
”.
NOTICE
On expiry of the countdown the heating element 5 is NOT switched off !
Therefore pay heed to the signal tone from the Timer q, so as to avoid
spoiling the food being fried.
When the battery is depleted, exchange it. Always use a replacement bat-
tery of the same type. Pay heed to the correct polarity when inserting it.
After Frying
1) When the food is ready, pull the handle upwards until the handle locking
button w engages.
2) Leave the frying basket
3 in this position to drip off .
3) Press the On/Off switch
0. The deep fryer is now switched off . Remove the
plug from the mains power socket.
4) When the food has dripped off , open the appliance lid by pressing the lid
release button
6.
WARNING! RISK OF INJURY!
Never take hold of the frying basket 3 directly after frying. It will be very
hot! Lift the frying basket 3 out of the fryer ONLY by the handle!
5) Carefully lift the frying basket
3 out of the deep fryer. If necessary, shake off
any excess oil or fat over the deep fryer.
6) Tip the fried food into a bowl or a sieve ( lined with absorbent kitchen
paper!).
IB_75818_SKF2300B2_LB2.indb 71IB_75818_SKF2300B2_LB2.indb 71 27.08.12 11:2227.08.12 11:22
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2300 B2 - IAN 75818 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 B2 - IAN 75818 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info