575429
76
Zoom out
Zoom in
Previous page
1/84
Next page
73
SKF 2300 B2
GB
WARNING - RISK OF BURNS!
Allow the appliance to cool down completely before cleaning it.
CAUTION - PROPERTY DAMAGE!
When cleaning the components do not use aggressive or abrasive clean-
ing agents or materials such as scouring milk or steel wool. These could
damage the upper surfaces of the appliance!
To simplify cleaning, completely dismantle the deep fryer:
1) Open the appliance lid as far as possible and then pull it upwards and out
of the hinge supports
2.
2) Remove the covering of the permanent metal fi lter
1 and lift the permanent
metal fi lter e out.
3) Pull the handle upwards until it audibly engages. Remove the frying basket
3.
4) Pull the operating/heating element
5 upwards from the guiding rails.
Place the operating/heating element 5 at a clean and dry location.
5) Take out the stainless steel container
4 and remove the fat or oil.
The frying basket 3 and the stainless steel container 4 can be cleaned in
the dishwasher. They are suitable for dishwashers.
Clean the housing with a moist cloth. If required, use a mild detergent on the
cloth.
Clean the operating/heating element 5 with a damp cloth and then dry it
well.
Clean the permanent metal fi lter e in warm water containing a mild detergent.
Clean the appliance lid in warm water containing a mild detergent. Rinse the
appliance lid off with clear water.
Dry the appliance lid and then place it upright on its side so that any excess
water still inside of the lid can drain away.
Be aware that the lid MUST be completely dry before re-use!
6) Dry all parts well before reassembly.
7) Reassemble the deep fryer in the reverse order.
IB_75818_SKF2300B2_LB2.indb 73IB_75818_SKF2300B2_LB2.indb 73 27.08.12 11:2227.08.12 11:22
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2300 B2 - IAN 75818 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 B2 - IAN 75818 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info