575429

Silvercrest SKF 2300 B2 - IAN 75818 Manual

73
Zoom out
Zoom in
Previous page
1/84
Next page
70
SKF 2300 B2
GB
6) Carefully replace the frying basket 3 into the deep fryer.
7) Close the appliance lid. This must click in audibly.
8) Push the handle locking button
w downwards. The handle now allows itself
to be lowered. The frying basket 3 is at the same time lowered into the hot
oil or fat.
NOTICE
► The frying process can be overseen through the viewing window r in the
appliance lid.
Solid Cooking Fats
To avoid a spraying of the fat and that the appliance becomes too hot, please
take the following precautions when using solid frying fat:
■ When replacing old fat with fresh, fi rst melt the fresh blocks of fat slowly,
under low heat, in a separate pan. Then carefully pour the molten fat into
the deep fryer. When this has been done, insert the plug into a mains power
socket and switch the deep fryer on.
■ After use, store the deep fryer with the solidifi ed fat at room temperatures.
Should the fat become too cold, it could cause splattering on remelting! To avoid
this, poke a few holes into the solidifi ed fat with a wooden or plastic spatula.
Ensure that no damage is caused to the heating element.
■ To melt the fat, switch the appliance on with the On/Off switch 0 and then
adjust the temperature regulator 8 to 130˚C. The control lamp integrated
into the On/Off switch 0 starts to glow.
■ Wait until all of the fat has melted. Thereby, the green indicator light 9 can
intermittently light up and go out. First set the desired frying temperature
when all of the fat has melted.
IB_75818_SKF2300B2_LB2.indb 70IB_75818_SKF2300B2_LB2.indb 70 27.08.12 11:2227.08.12 11:22
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2300 B2 - IAN 75818 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 B2 - IAN 75818 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info