646952
67
Zoom out
Zoom in
Previous page
1/74
Next page
65
GB
7. Assembling the
device
7.1 Assembling the frying
basket
1. Figure C: press the metal brackets on
the handle17 and put their ends into
the small eyes on the inside of the frying
basket18.
2. Tilt the handle17 towards the outside
until it locks in place.
7.2 Assembling the fryer
WARNING!
All parts must be dry and undamaged.
1. Put the oil container14 into the hous-
ing15.
2. Insert the base unit11 at the designat-
ed place on the housing. Let the rails of
the base unit11 just slide into the open-
ings on the housing15.
3. The basket18 and the handle17
should only be put into the fryer, when
oil and food have already been filled in
(see “Frying” on page 66).
8. Operation
8.1 Setting up
Fire hazard!
~ The mains plug10 should only be put
into the wall socket after the oil contain-
er14 has been filled with oil or melted
fat at least up to the MIN marking.
All parts of the fryer must be completely
dry, when you use the device.
Put the fryer on a stable, flat, non-slip,
dry, and non-inflammable work surface.
Do not use the fryer under wall units
and not near to any curtains, paper or
any similar inflammable objects.
Do not place the device directly under a
wall socket.
Keep a distance of at least 50 cm on all
sides.
8.2 Filling in the frying fat
Fire hazard / DANGER of
burns!
~ The level of the frying fat/oil in its liquid
state must be between the MAX and
MIN markings on the inside of the oil
container14.
~ Only fats and oils which are suitable for
frying should be used (see “The basics
of frying” on page 62).
1. Approx. 3.4 (MIN) to 3.6 (MAX) litres
of frying oil or approx. 3.6 kg of solid
frying fat are required.
2. Solid frying fat should first be put into a
pan and melted slowly at a low temper-
ature. Only then it should be poured
carefully into the oil container14 of the
fryer.
B53B)ULWWHXVHB%ERRN6HLWH0LWWZRFK$XJXVW
67


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-sef-2300-b2---ian-270289

Reset search

  • I do have a Monsieur cuisine, cannot remove the mixing bowl, it’s lock and does not show on your guidance book how to do it.
    Please could you let me know
    Thanking you
    Mrs Allison Submitted on 7-9-2020 at 17:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SEF 2300 B2 - IAN 270289 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEF 2300 B2 - IAN 270289 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info