Manual Silvercrest IAN 337297 SHMS 300 C2 (page 25 of 104) (English, German, Dutch, French, Polish)

749609

Zoom out

Zoom in

1/104

■ 22 │ GB│IE SHMS 300 C2

Puréeing

WARNING! RISK OF INJURY!

► Never use containers made from glass or

other easily breakable materials. These con-

tainers may be damaged and cause injuries.

ATTENTION! PROPERTY DAMAGE!

► Never use the blender e for hard foodstuﬀs

such as: coﬀee beans, ice cubes, sugar, cereals,

chocolate, raw/hard vegetables etc. This could

result in serious damage to the appliance.

► Do not use the blender e to purée boiling

food (e.g. soups). Remove the pot from the

hotplate before puréeing.

1) Use the blender e to purée foods.

Kneading

hooks t for

kneading

heavy doughs,

e.g. yeast

dough.

Whisks r

for stirring

batter or cake

mixture or

for whipping

cream.

Blender e

for puréeing

fruits/

vegetables,

e.g. apples.

2) Open the safety catch of the blender socket 4

by pushing it to the side and holding it ﬁrmly.

NOTE

► The blender e can only be used if the whisks r

or the kneading hooks t are not installed.

3) Push the blender e into the blender socket 4

and push it down ﬁrmly. The blender e must

audibly click into place.

4) To avoid overﬂowing, the container used for

blending should only be ﬁlled to about 2/3 of

its capacity. Select a suitably large container.

NOTE

► Ensure that there is a suﬃcient amount of

liquid/purée in the purée container.

To ensure eﬀective mixing of the ingredients,

the food should cover at least the lower section

of the blender e.

► Do not switch the hand mixer on until the

blender e has been inserted into the ingre-

dients.

5) Press the Turbo button / 2. Keep the Turbo

button / 2 pressed down during the whole

procedure. The appliance stops as soon as it

is released.

ATTENTION! PROPERTY DAMAGE!

► Do not operate the blender e for longer

than 1 minute at a time. After one minute of

use, allow the appliance to cool down fully.

6) When you have ﬁnished working with the

blender e, release the Turbo button/ 2 and

remove the mains plug from the power socket.

ATTENTION! PROPERTY DAMAGE!

► Clean only the lower section of the blender e

under running water. Do not allow water to

get inside the blender e. This could result in

damage to the appliance.

7) To remove the blender e from the blender

socket4 , press the blender release button 3

on both sides of the hand element q at

the same time. The blender e is now released

from the blender socket 4 .

8) Remove the blender e with a snapping motion

from the blender socket 4 .

IB_337297_SHMS300C2_LB8.indb 22 07.04.2020 11:23:43

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 337297 SHMS 300 C2 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 337297 SHMS 300 C2 Manual

Product: