749609
24
Zoom out
Zoom in
Previous page
1/104
Next page
GBIE 21 SHMS 300 C2
5) Replace the mixing bowl 8 on the mixer
stand 7.
6) Press the mixer holder release 6 and
swing the mixer holder 7 back downwards.
7) Place the hand element q on the mixer
holder 7 so that it firmly clicks into place.
8) Push the lid 0 into the rails on the mixer stand 7
so that it sits firmly in place.
NOTE
If you want to add ingredients during mixing,
open the filling opening 9 on the lid 0 and
add the ingredients. Close the filling opening
9 afterwards to prevent ingredients from
spraying out!
You can use the hand mixer without the mixer
stand 7. We recommend using the hand mixer
without the mixer stand 7 especially for small
amounts of liquid. Otherwise, the mixer cannot
reach all the liquid and it may not be properly mixed.
WARNING! RISK OF INJURY!
Never use containers made from glass or
other easily breakable materials. These con-
tainers may be damaged and cause injuries.
9) Insert the plug into a mains power socket.
10) To start up the appliance, move the speed
switch 1 to the desired speed setting. You can
choose between 5 speed settings and also
use the Turbo button/ 2 (see section "Speed
levels").
NOTE
If ingredients stick to the edge of the mixing
bowl 8 and cannot be reached by the
kneading hooks t/whisks r, switch off the
hand mixer.
Remove the lid 0. Use the dough scraper z to
push the stuck ingredients back into the middle
of the mixing bowl 8. Replace the lid 0.
Switch the hand mixer back on.
11) To remove the contents of the bowl, switch off
the hand mixer. Pull the lid 0 off to the side.
NOTE
For safety reasons, the whisks r and knead-
ing hooks t can only be released if the
speed switch 1 is set to the position "0".
12) Press the mixer holder release 6 , flip up
the mixer holder 7 and remove the mixing bowl
8 from the mixer stand 7. You can now re-
move the contents of the bowl.
NOTE
If you want to remove the whisks r or knead-
ing hooks t, you must first remove the hand
element q: To do this, press the hand mixer re-
lease 5 and remove the hand element q.
Then press the tool-release button w to release
the whisks r or the kneading hooks t.
For safety reasons, the whisks r and knead-
ing hooks t can only be released if the
speed switch 1 is set to the position "0".
IB_337297_SHMS300C2_LB8.indb 21 07.04.2020 11:23:42
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 337297 SHMS 300 C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 337297 SHMS 300 C2 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info