751768
37
Zoom out
Zoom in
Previous page
1/158
Next page
34 GBIE SFM 850 A4
NOTE
The frying process can be monitored through the viewing window in the lid
of the appliance.
Solid cooking fats
To prevent fat from spraying and the appliance from becoming too hot, please
take the following precautions when using solid frying fat:
When using fresh fat, start by melting the blocks of fat slowly, under low
heat, in a normal saucepan. Then carefully pour the molten fat into the deep
fat fryer. Only when this has been done should you insert the plug into a
mains power socket and switch the deep fat fryer on.
After use, store the deep fat fryer with the solidified fat at room temperature.
If the fat gets too cold, it could splatter out upon re-melting! To avoid this,
pierce a few holes in the solidified fat with a wooden or plastic skewer.
Ensure that you do not damage the frying container coating .
To melt the fat, plug the appliance into the mains power socket, set the on/
off switch to the “I” position and turn the temperature control to
130˚C. The Power control lamp lights up.
Wait until all of the fat has melted. The Ready control lamp may come on
and go out several times during this process. Do not set the desired frying
temperature until all of the fat has melted.
After frying
WARNING! RISK OF INJURY!
Never touch the frying basket - directly after deep frying. It is extremely
hot! Lift the frying basket - out of the deep fat fryer only by the handles !
1) When the fried food is ready, press the lid release button so that the lid
pops open.
2) Lift the frying basket - and hang it on the rim of the appliance so that excess
fat can drip off.
3) Turn the temperature control to MIN.
4) To switch the appliance off, set the on/off switch to the “O” position.
5) Pull the plug out of the power socket.
6) Once the fried food has dripped dry, lift the frying basket - carefully out
of the deep fat fryer.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 326680 SFM 850 A4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326680 SFM 850 A4 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info