751860
29
Zoom out
Zoom in
Previous page
1/141
Next page
27
GB
~The lid should be kept closed during
heating and frying.
~Hot steam escapes from the oil filter dur-
ing frying. Be careful not to put your
hands into the steam.
~Do not touch any hot parts of the de-
vice, e.g. the inspection window, the
openings in the lid, or the metal housing
of the deep fryer. Only touch the frying
baskets by their handles.
~After frying, the deep fryer should cool
down for at least 1 to 2 hours before
you empty the oil container and clean
the device.
DANGER of slipping
~Avoid any splashes of oil/fat on the
floor. There is a danger of slipping!
DANGER! Risk of electric
shock due to moisture
~Protect the device from moisture, water
drops and water splashes.
~Do not use the device in the open air or
near vessels filled with water, e.g. sinks.
~If the device has fallen into water, pull
out the mains plug immediately, and
only then remove the device from the
water. Do not use the device again, and
have it checked by a specialist work-
shop.
DANGER! Risk of electric
shock
~Do not use the device if the device or
the power cable has any visible dam-
age, or if the device has previously
been dropped.
~Extension cables must be designed for a
minimum of 10 ampere.
~
Lay the power cable and any extension ca-
ble such that nobody can step on them, get
caught on them, or trip over them.
~Before connecting the device, check that
the on/off switch is set to O.
~Connect the mains plug only to a cor-
rectly installed, easily accessible
earthed wall socket with voltage corre-
sponding to the rating plate. The wall
socket must still be easily accessible af-
ter connection.
~Ensure that the power cable cannot be
damaged by sharp edges or hot spots.
Do not wrap the power cable around
the device. Use the cable spool on the
back of the device.
~Even after it has been switched off, the
device is not completely disconnected
from the mains. In order to fully discon-
nect it, pull out the mains plug.
~When setting up the device, make sure
that the power cable is not trapped or
crushed.
~To pull the mains plug out of the wall
socket, always pull on the mains plug,
and never on the power cable.
~Disconnect the mains plug from the wall
socket …
if there is a fault,
if the device or the power cable is
damaged;
when you are not using the device,
before you clean the device and
during thunderstorms.
~Do not connect another device with a
high power consumption to a wall sock-
et on the same electrical circuit. This
way you will avoid overloading the
mains power supply.
~Do not connect the device by using a
multiple socket. By doing so the socket
might be overloaded.
~In order to avoid any hazards, do not
make modifications to the device.
__322493_Edelstahl Fritteuse_B8.book Seite 27 Freitag, 28. Juni 2019 9:32 21
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 322493 SEF3 2000 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 322493 SEF3 2000 D3 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info