Manual Silvercrest IAN 316620 SSM 1000 A1 (page 17 of 25) (English)

751777

Zoom out

Zoom in

1/25

2. If desired, first change the pressure level:

Press the pressure button Pressure Level|40 to

switch between High|54 and Low|56.

3. The change the cooking time within the adjustable

range:

- Repeatedly press the program button to switch be-

tween the default settings Less, Normal, More|51.

- You can use the buttons +|33/–|46 if necessary to

set the desired time manually.

- By keeping the buttons +|33/–|46 pressed, you can

cycle through the values faster.

4. Briefly press the Start button Start|44 to start the

cooking program.

- The LEDs above the selected program button and

above the Start button Start|44 will be lit continu-

ously.

-The display|29 will show ON and a running pro-

gress bar|55, indicating that the device is heating up

and building up pressure.

- This may take some time depending on filling volume

and cooking program.

5. When the temperature and pressure have been

reached, the cooking program starts automatically.

-The display|29 counts down the cooking time.

- In order to maintain the temperature, the device auto-

matically switches back and forth between heating

up (progress bar|55 running) and heating switched

off (progress bar|55 stationary).

6. The end of the cooking process is signalled by beeps.

The device automatically switches to the warm pro-

gram. The LED of the Cancel button Keep Warm/

Cancel |37 is lit. The display|29 counts the warm

time upwards from 00:00. The pressure is slowly re-

leased.

10.4 Interrupt the cooking process

• To cancel a running program, press the Cancel button

Keep Warm/Cancel|37.

The device is then in standby mode. The display|29

will show OFF.

10.5 End cooking

1. End the cooking program or the warm program by

pressing the Cancel button Keep Warm/Can-

cel|37.

The display|29 shows OFF. The device is in standby

mode.

2. Pull the mains plug|16 out of the wall socket.

3. Select a suitable method for reducing the pressure in

the pot and safely opening the lid|5 (see “Opening

lid safely (while hot)” on page 12).

4. Remove the hot pot|7 using potholders or oven

gloves.

5. Allow the device to cool down before you clean it.

10.6 Warm (Keep Warm/Cancel)

When a cooking program has ended, the device automat-

ically switches to the warm program Keep Warm/Can-

cel|37.

You can also start the warm program manually in order to

keep hot food warm in the Multi-Pot.

NOTES:

• Keeping food warm for very long periods changes the

flavour and appearance, vitamins are destroyed, and

the food can go bad.

• Because the warm program works without pressure,

you can open and close the lid|5 while the program is

running. You should however be aware of any residual

pressure that may be present after another cooking

program.

• After the yoghurt program (Yogurt|43), the device

does not automatically switch to the warm program.

1. Place the hot food into the pot|7.

2. Wipe down the outside of the pot|7 if necessary. It

must be clean and dry.

3. Place the pot|7 into the base unit|17.

4. Place the lid|5 and lock it, such that the arrow mark-

ing|6 points to the marking |9. The locking

mechanism will click audibly.

5. Open the pressure valve|1 by pressing down on the

pressure valve button |2 until it clicks into place.

6. Use the mains power cable|16 to connect the

port|18 on the base unit|17 to a properly installed

earthed wall socket that corresponds to the technical

data.

7. As soon as the device is connected to the power sup-

ply, the display|29 will show OFF. The device is in

standby mode.

8. Click the Cancel button Keep Warm/Cancel|37

to start the warm program.

The LED of the Cancel button Keep Warm/Can-

cel|37 is lit. The display|29 counts the warm time

upwards from 00:00.

After 12 hours, the warm program ends automatical-

ly.

9. Click the Cancel button again to end the warm pro-

gram Keep Warm/Cancel|37.

The LED of the Cancel button Keep Warm/Can-

cel|37 goes out. The display|29 will show OFF. The

device is in standby mode.

10. Pull the mains plug|16 out of the wall socket.

11. Open the lid|5 and place it in the drip dry position

(see “Placing lid in drip-dry position” on page 11).

12. Remove the hot pot|7 using potholders or oven

gloves.

13. Allow the device to cool down before you clean it.

|57 This symbol indicates that the device is

heating up and building up pressure.

|53 This symbol indicates that the set pres-

sure has been reached.

sur les boutons de commande peut on enlever le film protecteur Submitted on 19-2-2022 at 11:17
Reply Report abuse
peut on on enlever le film de protection des commandes Submitted on 19-2-2022 at 11:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 316620 SSM 1000 A1 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 316620 SSM 1000 A1

Silvercrest IAN 316620 SSM 1000 A1 User Manual - German - 72 pages

Silvercrest IAN 316620 SSM 1000 A1 User Manual - Dutch, French - 50 pages

Silvercrest IAN 316620 SSM 1000 A1 User Manual - Italian - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 316620 SSM 1000 A1 Manual

Product: