Manual Silvercrest IAN 316620 SSM 1000 A1 (page 14 of 25) (English)

751777

Zoom out

Zoom in

1/25

12 GB

8.6 Opening lid safely (while hot)

DANGER! Risk of injury from scalding!

~Do not open the Multi-Pot while it is pressurised. Please

take note of the pressure indicator|23. Wait until the

pressure has dropped, or open the pressure valve|1

until only a little steam is coming out. Never use force

to open the Multi-Pot.

~Ensure that no body parts (e.g. hand or arm) are

above the pressure valve|1 when you open this using

the pressure valve button |2 and steam escapes.

There is a danger of being scalded by escaping

steam.

DANGER! Risk of injury from hot food!

~When you have heated semi-liquid food, carefully

shake the Multi-Pot before opening. This should prevent

food from spraying out.

~If you have cooked meat with the skin on, the skin can

swell up. Do not pierce the meat while the skin is swol-

len.

DANGER! Risk of injury from burning!

~Only touch the hot device on the operating panel|10

or by the handles|3/20.

When the Multi-Pot is pressurised, the pressure must first be

released from the pot before it can be opened safely. A

safety mechanism prevents the lid|5 from being opened as

long as the pressure indicator|23 is lifted.

To release the pressure, you have two options:

-For fast steam release, the pressure is rapidly re-

leased through the pressure valve|1.

-For slow cooling, the pressure is released slowly

without a valve being opened.

NOTES:

• Use slow cooling if large volumes of liquid (e.g. soup)

or foods containing a lot of starch (e.g. porridge) are

inside the Multi-Pot. These foods can spray out with the

steam during fast steam release, blocking the valves.

• Use fast steam release if possible for foods with short

cooking times that can quickly be overcooked.

• When you use the warm program Keep Warm/

Cancel|37, the pressure is released slowly.

• If you use a cooking program without pressure, steam

release is unnecessary. When you open the lid|5, be

careful of the hot food and hot surfaces.

• If the pressure indicator|23 does not sink down, de-

spite there being no steam and no pressure escaping

the pressure indicator may have become dirty and

stuck. If this happens, press down gently on the pres-

sure indicator using a pen, chopstick or similar.

Fast steam release

1. Stop the cooking process and pull out the mains

plug|16.

2. Press down carefully on the pressure valve

button |2 until it clicks into place, in order to open

the pressure valve|1. The pressure is released from

the Multi-Pot. This will cause hot steam to es-

cape!

3. Check that the pressure indicator|23 has sunk down.

4. Hold down the release button|24 while you turn the

lid|5 clockwise until the arrow marking|6 points to

the marking |19.

5. Carefully remove the lid|5 in an upward direction.

Slow cooling

When the device is in standby (display shows OFF) or

whilst the warm program Keep Warm/Cancel|37 is

running, pressure will be released slowly and automatical-

ly. How long the cooling process takes depends on the

quantity of food, and can take up to 15 minutes.

1. Allow the Multi-Pot to cool until the pressure indica-

tor|23 has sunk down.

NOTE: you can speed up the cooling process somewhat

by placing a cold, damp (but well wrung-out) towel over

the lid. If you do this, first pull out the mains plug|16.

2. Hold down the release button|24 while you turn the

lid|5 clockwise until the arrow marking|6 points to

the marking |19.

3. Carefully remove the lid|5 in an upward direction.

sur les boutons de commande peut on enlever le film protecteur Submitted on 19-2-2022 at 11:17
Reply Report abuse
peut on on enlever le film de protection des commandes Submitted on 19-2-2022 at 11:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 316620 SSM 1000 A1 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 316620 SSM 1000 A1

Silvercrest IAN 316620 SSM 1000 A1 User Manual - German - 72 pages

Silvercrest IAN 316620 SSM 1000 A1 User Manual - Dutch, French - 50 pages

Silvercrest IAN 316620 SSM 1000 A1 User Manual - Italian - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 316620 SSM 1000 A1 Manual

Product: