Manual Silvercrest IAN 316620 SSM 1000 A1 (page 13 of 25) (English)

751777

Zoom out

Zoom in

1/25

7. Before first use

• Clean the device prior to its first use (see

“Cleaning and storage” on page 20)!

• Remove the protective film from the operating pan-

el|10.

NOTE: because the device is slightly greased when deliv-

ered, slight smoke and odour may be produced during its

first use. This is harmless and stops after a short amount of

time. Please ensure sufficient ventilation in the meantime.

8. Handling of the Multi-Pot

8.1 Opening lid (when cold)

Figure B:

1. Hold down the release button|24 while you turn the

lid|5 clockwise until the arrow marking|6 points to

the marking |19.

2. Remove the lid|5 upwards.

8.2 Placing lid in drip-dry position

Figure C: for example to drip-dry the hot lid, you can

place the lid|5 upright with the tab|4 in the recess in one

of the handles|20 of the base unit|17.

8.3 Closing lid

Figure D:

For pressure to be able to build up in the Multi-Pot, it is im-

portant that the lid|5 is closed correctly.

1. Place the lid|5 with the arrow marking T|6 pointing

to the marking |19.

2. Turn the lid|5 anticlockwise until the arrow

marking T|6 points to the marking |9. The lock-

ing mechanism will click audibly.

NOTE: when the lid|5 is on top of the base unit but not

correctly closed, signal sounds will be heard and the dis-

play|29 will show Lid.

8.4 Opening/closing pressure valve

DANGER! Risk of injury from scalding!

~Ensure that no body parts (e.g. hand or arm) are

above the pressure valve|1 when you open this using

the pressure valve button |2 and steam escapes.

There is a danger of being scalded by escaping

steam.

The pressure valve button |2 allows you to open and

close the pressure valve|1.

8.5 Pressure indicator

DANGER! Risk of injury from scalding!

~Before each use, you must check to ensure that the un-

derside of the pressure indicator|27 is clean and

moves freely (see “Preparations before each use” on

page 13).

~Ensure that no body parts (e.g. hand or arm) are

above the pressure indicator|23 when steam escapes

from it.

The pressure indicator|23 is a valve located in a recess in

the lid|5. Hot steam can flow out of this valve when pres-

sure has built up inside the Multi-Pot. You can see that the

Multi-Pot is pressurised when the pressure indicator|23 is

lifted.

Opening Closing

• Press down the pressure

valve button |2 until it

clicks into place.

• Press down the pressure

valve button |2 so

that it disengages.

sur les boutons de commande peut on enlever le film protecteur Submitted on 19-2-2022 at 11:17
Reply Report abuse
peut on on enlever le film de protection des commandes Submitted on 19-2-2022 at 11:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 316620 SSM 1000 A1 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 316620 SSM 1000 A1

Silvercrest IAN 316620 SSM 1000 A1 User Manual - German - 72 pages

Silvercrest IAN 316620 SSM 1000 A1 User Manual - Dutch, French - 50 pages

Silvercrest IAN 316620 SSM 1000 A1 User Manual - Italian - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 316620 SSM 1000 A1 Manual

Product: