Manual Silvercrest IAN 314160 SDMF 1100 A1 (page 22 of 91) (English, German, Dutch, French, Polish, Swedish)

753867

Zoom out

Zoom in

1/91

20 GB

6. Operation

6.1 Care instructions

•

All materials marked with the iron sym-

bols to can be treated using

the steam brush.

•

Materials marked with the crossed-out

iron symbol must not be treated using

the steam brush.

• Do not treat leather, velvet, impregnated

furniture, or materials that are sensitive to

steam. Otherwise you could damage the

textiles/furniture.

• Caution is required in the case of materi-

als that are sensitive to heat, such as syn-

thetic materials (e.g. polyamide or

rayon). With these materials you should

test beforehand in a spot that is not visi-

ble (e.g. the inside of a seam) to deter-

mine whether the hot steam damages the

material. Do not touch these materials di-

rectly with the hot steam unit|

6.2 Tips on smoothing

• The best results can be obtained if you

hang the items of clothing after washing,

e.g. on a clothes hanger. The material

thus dries with fewer creases.

• To support this process, you can pull the

material smooth. However, be careful

not to steam your hand.

• Very strong folds or a smooth, ironed

appearance cannot be produced using

the steam brush. In such cases, we rec-

ommend using an iron.

• During steam smoothing, the material

absorbs moisture. Allow the materials to

dry completely before you put them

away, e.g. in a wardrobe.

6.3 Filling the water tank

• Use clean tap water without any addi-

tives (e.g. vinegar, starch, perfume, sof-

tener).

• If your tap water is of medium hardness

or higher, mix in some distilled water:

• Your local waterworks will inform you of

the hardness of your water.

1. Figure A: press both release buttons|5

of the water tank|8 and pull the tank

straight outwards.

2. Open the lid|7 over the filling opening|6.

3. Hold the water tank|8 under a tap and

fill it no higher than the MAX marking

and then close the lid|7.

4. Place the water tank|8 onto the device.

The water tank must audibly click into

place with the release mechanism|5.

6.4 Steam function

DANGER! Risk of injury

through burning!

~Warning, risk of burns from steam and

splashes of hot water when using the

steam button|4! When steaming, al-

ways point the steam unit|3 towards the

item of laundry.

NOTE: the steam function can be used with

or without the clothes brush|2.

Hardness of the

tap water

Distilled water :

tap water

very soft/soft 0

medium 1 : 1

hard 2 : 1

very hard 3 : 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 314160 SDMF 1100 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 314160 SDMF 1100 A1 Manual

Product: