Manual Silvercrest IAN 314160 SDMF 1100 A1 (page 21 of 91) (English, German, Dutch, French, Polish, Swedish)

753867

Zoom out

Zoom in

1/91

DANGER! Risk of injury

through burning

~Do not touch the hot surfaces of the de-

vice.

~Allow the device to cool down com-

pletely before you clean it or put it

away.

~Warning, risk of burns from steam and

splashes of hot water when using the

steam button! When steaming, always

point the steam unit towards the item of

laundry.

~The steam unit becomes very hot during

operation. Only touch the handle and

control elements of the device during

operation.

~Never smooth clothes while they are be-

ing worn.

~Only transport the device when it has

cooled down.

~Wait for the device to cool down before

cleaning.

~Please wait until the device has cooled

down before you attach and remove the

clothes brush.

~Allow items of clothing to cool down on

a clothes hanger before you wear them.

WARNING! Risk of material

damage

Only use the original accessories.

~Do not use any sharp or abrasive clean-

ing aids.

~Do not use the device on e.g. zips, met-

al buttons or applications that could

damage the steam unit.

~Never fill the water tank with chemical

substances, cleaning agents – with the

exception of descaling agents – or other

liquids. Do not use chemically deminer-

alised water. This may result in irrepara-

ble damage to the device.

4. Items supplied

1 steam brush

1 clothes brush|2

1 copy of the user instructions

Please observe the illustrations on the fold-

out page.

Unpacking

1. Remove all parts from the packaging.

2. Check that all parts are present and in-

tact.

3. Remove any stickers or films from the

device.

5. Before using for the

first time

NOTE: you may notice an odour when us-

ing for the first time. This is a result of the

manufacturing process and is not a defect

with the device. Ensure adequate ventila-

tion.

1. Ensure that you have pulled out the

mains plug|10.

2. Figure A: press both release buttons|5

of the water tank|8 and pull the tank

straight outwards.

3. Open the lid|7 over the filling opening|6.

4. Fill the water tank|8 to about halfway

and then close the lid|7.

5. Place the water tank|8 onto the device.

The water tank must audibly click into

place with the release mechanism|5.

6. Insert the mains plug|10 into an

earthed wall socket corresponding to

the technical data.

The control light|1 flashes.

7. When the device is ready to steam, the

control light|1 will be lit continuously.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 314160 SDMF 1100 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 314160 SDMF 1100 A1 Manual

Product: