752914
39
Zoom out
Zoom in
Previous page
1/156
Next page
37
GB
6. Remove the auger|5 from the screen as-
sembly|6 / sorbet assembly|19.
7. If necessary, remove the holder|7 from
the working container|8.
8. Turn the working container|8 anticlock-
wise until the z mark points to the
opened lock symbol . Remove the
working container|8.
12. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric
shock!
~Pull the mains plug|11 out of the wall
socket before you disassemble and
clean the device.
WARNING! Risk of material damage!
~Do not use any astringent or abrasive
cleaning agents.
After every use
Clean the device and all accessories
used after each use and remove all food
residues.
All accessories must be disassembled
and individually cleaned.
Seals
Proceed as follows for the hygienic cleaning
of the seals|20,|21 and|22:
Figure A: remove the seal|20 from the
drip stopper|10.
Figure B: take the seal|21 out of the
working container|8.
Figure C: pull the seal|22 on the un-
derside of the working container|8 out
of the pulp outlet|17.
The seal|22 remains firmly attached to
the working container|8 and can be
cleaned in the dishwasher or by hand.
The seals|20 and|21 can be cleaned
either in the dishwasher cutlery basket
or manually.
Allow the seals to dry completely before
reinstalling.
Base unit
DANGER! Risk of electric
shock!
~The following parts must never be im-
mersed in water or other liquids, and
must not be cleaned in the dishwasher:
-the base unit|13 including the power
cable with mains plug|11.
~The cleaning brush|14 must not be
cleaned in the dishwasher.
Wipe off the base unit|13 and the power
cable|11, using a lightly moistened cloth.
Dry with a dry cloth.
Accessories
The following accessories can be cleaned
both by hand and in the dishwasher:
- Food pusher|1
- Filling aid|2
-Lid|4
-Auger|5
- Screen assembly|6
-Holder|7
- Working container (max. 300 ml)|8
- Juice container (max. 600 ml)|15
- Pulp container (max. 1200 ml)|16
- Sorbet assembly|19
1. Remove food residues with the clean-
ing brush|14. Do not exert a lot of
pressure on the screen surfaces of the
screen assembly|6.
2. Clean the accessories with warm water
and a little detergent. Afterwards, rinse
all parts with clean water.
Or:
Place the accessories in the dishwasher
and/or the small parts in the cutlery
basket.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 311807 SSJ 300 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 311807 SSJ 300 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info