752914

Silvercrest IAN 311807 SSJ 300 A1 Manual

38
Zoom out
Zoom in
Previous page
1/156
Next page
36 GB
9.4 Switching on/off and
reverse mode
• To turn on the device, set the on/off
switch|12 to 1.
• To turn off the device, set the on/off
switch|12 to 0.
• If you set the on/off switch|12 to R, you
will start reverse mode. With this func-
tion you can eliminate small blockages.
9.5 Removing blockages
If a piece of fruit or vegetable is blocking the
auger|5, it must be removed immediately.
You can recognise a blockage...
… if no more juice comes out of the
juice outlet|9, even though pieces of
food are still in the chute.
… if the pieces of food in the food
chute|3 no longer slide down,
… if there are unusual sounds, or
… if the motor becomes audibly slower.
Reverse mode
First, try to fix the blockage by using reverse
mode:
1. Set the on/off switch|12 in sequence
to 0, for approx. 2 seconds to R (re-
verse mode) and again to 0.
2.
Turn the on/off switch|
12
to
1
.
Check
whether the device is working normally.
3. Repeat the process, if necessary.
Cleaning the device
If this does not resolve the blockage, follow
these steps:
1. Pull out the mains plug|11.
2. Take the device apart (see “Disassem-
bly” on page 36).
3. Clean the auger|5, the holder|7, the
screen assembly|6 and the working
container|8 (see “Cleaning” on
page 37).
4. Reassemble the parts and proceed with
juice extraction.
10. Preparing a sorbet
WARNING! Risk of material dam-
age!
~The device is designed to prepare sor-
bet for up to 5 minutes maximum oper-
ating time without interruption. After
this, the device must remain switched off
until the base unit|13 has completely
cooled down.
1. Assemble the device for sorbet prepa-
ration (see “Insert the sorbet assembly”
on page 33).
2. Prepare half frozen fruit pieces (see
“Preparing food for sorbet prepara-
tion” on page 34).
3. Proceed in the same way as for juicing.
The finished sorbet is ejected through
the juice outlet|9.
4. Mix the sorbet again with a spoon and
serve it immediately.
11. Disassembly
DANGER! Risk of electric
shock!
~Pull the mains plug|11 out of the wall
socket before you disassemble and
clean the device.
1. Pull the food pusher|1 off upwards
from the food chute|3.
2. Remove the filling aid|2.
3. Turn the lid|4 anticlockwise until
the point|symbol • points to the
opened lock symbol . Remove the
lid|4.
4. Close the drip stopper|10.
5. Pull out upwards the screen assembly|6 /
sorbet assembly|19 complete with the
auger|5. While doing this, move these
parts somewhat back and forth to
make them easier to release.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 311807 SSJ 300 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 311807 SSJ 300 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info