790195
47
Zoom out
Zoom in
Previous page
1/56
Next page
Faults and what to do about them en
47
Faults and what to do about them
Faults Cause/Remedy
Water is leaking from the
appliance.
Attach the drain hose correctly or replace it.
Tighten the screw fitting on the supply hose.
The door cannot be
opened.
~~~ (Rinse hold = no final drain) is activated (depending on the
model). Continue the programme by selecting Spin/Drain and pressing
Start Reload .
The temperature in drum is too high to open the door.
The safety function is activated. Stop the programme?
The water level in drum is too high.
Can the door only be opened by the emergency release?
~ "Emergency release" on page 45
The appliance is not filling
with water.
Detergent is not being dis-
pensed.
Programme does not start?
Is the tap turned on?
Could the filter in the water supply be blocked?
~ "Filter in the water supply is blocked" on page 44
Note: If an additional water filter has been installed (depending on the
model), check for contaminants and clean if required ~ separate installa-
tion and cleaning instruction for water filter.
Is the supply hose kinked or trapped?
The programme will not
start.
Have you touched the Start Reload button or selected Ready in/Time
Dry?
Is the door closed?
Childproof lock activated? Deactivate childproof lock.
Shop mode activated? If the display shows à•‹ for 5 s after you have
switched on the appliance, the appliance is in shop mode. Wait for the dis-
play message à•‹ to disappear. Touch and hold Start Reload for at least
5 s. ‹”” will appear in the display panel. Turn the programme selector to
Û (Off). Now you already turned off the shop mode. You can use the appli-
ance now as usual.
The programme has
started and the drum is
rotating, but the drum is
not filling with water.
Not a fault – Some programme specifically detect and weigh the load after the
programme has started in order to calculate the optimum amount of water for
washing. The drum will then start filling with water.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WN44G290GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WN44G290GB in the language / languages: English as an attachment in your email.

The manual is 2.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info