790195
46
Zoom out
Zoom in
Previous page
1/56
Next page
en Faults and what to do about them
46
| Flashes (no water supply): Water tap turned on? Filter in the water supply is
blocked? ~ "Filter in the water supply is blocked" on page 44
Is the supply hose kinked or trapped?
Lights up (low water pressure): For information only. This will not affect the
programme progress. The programme duration is extended.
w lights up The childproof lock is activated – deactivate it.
The symbol k
flashes
Run the Cottons 90°C programme to clean and care for the drum and the outer
tub.
Notes
Run the programme without laundry.
Use washing powder or a detergent containing bleach. To prevent foaming,
only use half the amount of detergent recommended by the detergent manu-
facturer. Do not use detergent designed for woollens or delicates.
Switching the drum care information signal on/off. ~ Page 40
E:36
alternating with
-10
Drain pipe or water drain hose is blocked. Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe
and water drain hose are not kinked or trapped.
The drain pump is blocked.
~ "Drain pump is blocked" on page 42
The drain hose at the siphon is blocked.
~ "The drain hose at the siphon is blocked" on page 43
The water drain hose is connected too high. Install the water outlet hose at a
maximum height of 1 meter.
~ Page 16
E:35
alternating with
-10 (Suitable for spe-
cial models)
There is water in the base trough, the appliance is leaking. Turn off the tap. Call
customer services.
H:95
alternating with
“Ÿš
when programme is
finished
No water detected in drying phase, may get bad drying result.
~ "Filter in the water supply is blocked" on page 44
H:32
alternating with
“Ÿš
when programme is
finished
The unbalanced load detection system has interrupted the spin cycle because the
laundry is unevenly distributed. Distribute small and large items of laundry evenly in
the drum.
Other displays Turn the programme selector to Û (Off), wait for five seconds and then switch it on
again. If the display appears again, call customer services.
Display Cause/Remedy
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WN44G290GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WN44G290GB in the language / languages: English as an attachment in your email.

The manual is 2.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info