Manual Siemens ts 25 gp100 slider sl25 green power (page 11 of 102) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

324045

Zoom out

Zoom in

1/102

7. The “Steam ready” indicator lamp (7) will light up after

several minutes, indicating that the appliance is ready to

use.

The steam generator will take more time to reach “Steam

ready” state only upon the initial heating up, or after

performing the de-scaling operation (Calc’n clean).

When water is already present in the steam generator

during regular use, heat up time to reach the operating

temperature will be faster.

8. This appliance has a built-in water level sensor. The “reﬁll

water tank” indicator (3) will light when the water tank is

empty.

Important:

• Normal tap water can be used.

To prolong the optimum steam function, mix tap water with

distilled water 1:1. If the tap water in your district is very

hard, mix tap water with distilled water 1:2.

You can inquire about the water hardness with your local

water supplier.

• The water tank can be ﬁlled at any time while using the

appliance.

• To avoid damage and/or contamination of the water

tank and the boiler, do not put perfume, vinegar, starch,

descaling agents, additives or any other type of chemical

product into the water tank.

Any damage caused by the use of the aforementioned

products, will make the guarantee void.

• The iron is not designed to rest on its heal. Please always

position it horizontally on the iron pad (2).

• The iron pad can be placed into the specially designed

recess on the appliance or somewhere suitable alongside

the ironing area.

Never rest the iron on the appliance without the iron

pad!.

• During it ﬁrst use the iron may produce certain vapours

and odours, along with white particles on the soleplate,

this is normal and it will stop after a few minutes

• While the steam release button is pressed, the water tank

may produce a pumping sound, this is normal, indicating

that water is being pumped to the steam tank.

Setting the temperature

1. Check the ironing instruction label on the garment to

determine the correct ironing temperature.

2. Select the temperature (10)

“•” Synthetics

“••” Silk – Wool

“•••” Cotton – Linen

3. The indicator lamp (12) will remain lit while the iron is

heating and go out as soon as the iron has reached the

selected temperature.

Tips:

• Sort your garments out based on their cleaning symbol

labels, always starting with clothes that have to be ironed

at the lowest temperatures.

• If you are not sure what the garment is made of then begin

ironing at a low temperature and decide on the correct

temperature by ironing a small section not usually seen

when worn

Ironing with steam (B)

1. Turn the temperature selector (10) to the required setting.

2. Set the amount of steam to suit your needs, using the

variable steam control (4) (depending on the model).

For normal use, please choose one of the following

recommended settings:

Temperature Steam setting

•1

•• 5

••• 10

3. Press the steam release button to release steam.

Attention:

1. When ironing on a lower temperature setting “•”.

• If the appliance has variable steam control (4), set the

variable steam control to its lowest position (“1”).

• If the appliance does not have variable steam control,

press the steam release button only for a few seconds at a

time when ironing at lower temperatures.

In both cases, if you ﬁnd that water is dripping out of the

soleplate, set the temperature selector (10) to a higher

position (take care that the garment can be ironed on this

heat temperature setting).

2. At the beginning of each use, it is possible that drops of

water will be dispensed alongside steam. Therefore, it is

advisable to try the iron on the ironing board or a piece of

cloth to start with.

Ironing without steam

1. Begin ironing but without pressing the steam release

button (11).

Vertical steam (C)

1. Set the temperature control to the “•••” or “max” position.

2. You can steam iron curtains and hanging garments

(jackets, suits, coats...) by placing the iron in a vertical

position and pressing the steam release button (11).

Never direct the steam jet at garments that are being worn.

Never aim the steam at people or animals.

Intelligent steam

(depending on model)

This system has intelligent steam control, which, after

releasing the steam release button (11), provides a small

amount of additional steam.

The additional steam can always be stopped by brieﬂy

pressing the steam release button once again.

Auto shut-off

(depending on the model)

If during ironing the steam release button (11) on the handle of

the iron is not pressed for a certain length of time (8 minutes),

the steam station will automatically switch off.

The “Auto shut-off” pilot lamp (7) will ﬂash when auto shut-off

has been activated.

To switch the steam station back on, press the steam release

button again, and wait until the “Auto shut-off” pilot lamp

remains lit continuously.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens ts 25 gp100 slider sl25 green power in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens ts 25 gp100 slider sl25 green power Manual

Product: