Manual Siemens ts 25 gp100 slider sl25 green power (page 10 of 102) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

324045

Zoom out

Zoom in

1/102

Thank you for buying the SL25 steam station, the new

steam-ironing system from Siemens.

Carefully read through the operating instructions for the

appliance and safeguard them for future reference.

Introduction

These instructions for use contain valuable information about

the unique features of this system and some hints to make

ironing easier for you.

This powerful system produces non-stop steam for an ideal

ironing performance. It has a large detachable water tank that

can be reﬁlled at any time without switching off the system.

We hope that you enjoy ironing with this steam station.

Important

Open out the ﬁrst page of the booklet, this will help you to

understand how the appliance works.

This appliance complies with international safety standards.

This appliance has been designed exclusively for domestic

use and must not be used for industrial purposes.

This appliance must only be used only for the purposes for

which it was designed, i.e. as an iron. Any other use will

be considered improper and consequently dangerous. The

manufacturer will not be held responsible for any damage

arising from misuse or improper use.

General safety instructions

• This appliance is to be connected and used in accordance

with the information stated on its characteristics plate.

• This appliance must be connected to an earthed socket. If

it is absolutely necessary to use an extension cable, make

sure that it is suitable for 16A and has a socket with an

earth connection.

• The iron should not be used if it has been dropped, if there

are visible signs of damage or if it is leaking water. It must

be checked by an authorized Technical Service Centre

before it can be used again.

• If the safety fuse ﬁtted in the appliance blows, the appliance

will be rendered inoperative. To restore normal operation

the appliance will have to be taken to an authorised

Technical Service Centre.

• In order to avoid that, under unfavourable mains conditions,

phenomena like transient voltage drops or lighting

ﬂuctuations can happen, it is recommended that the iron

is connected to a power supply system with a maximum

impedance of 0.27 Ω. If necessary, the user can ask the

public power supply company for the system impedance at

the interface point.

• This appliance is not intended to be used by persons

(including children) with reduced physical, sensory or

mental capacities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning the use of the appliance by a person

responsible for their safety.

• Children should be supervised to ensure that they do not

play with the appliance.

• Remove the plug from the socket before ﬁlling the

appliance with water or before pouring out the remaining

water after use.

• The appliance must never be placed directly under the tap

to ﬁll the water tank.

• The appliance must be used and placed on a stable

surface.

• When placed on its stand, make sure that the surface on

which the stand is placed is stable.

• The iron must not be left unattended while it is connected

to the supply mains.

• Unplug the appliance from the mains supply after each

use, or if a fault is suspected.

• The electrical plug must not be removed from the socket

by pulling the cable.

• Never immerse the iron or steam tank in water or any other

ﬂuid.

• Do not leave the appliance exposed to weather conditions

(rain, sun, frost, etc.).

• With the aim of avoiding dangerous situations, any work

or repair that the appliance may need, e.g. replacing a

faulty mains cable, must only be carried out by qualiﬁed

personnel from an Authorised Technical Service Centre.

Important :

• This appliance reaches high temperatures and produces

steam during use, this could cause scalds or burns in case

of improper use.

• The steam hose, base station and in particular the iron can

get hot when used.

• Never aim the steam at people or animals.

• Do not allow the power cable to come into contact with the

soleplate when it is hot.

• Be aware that the system can keep on steaming a short

additional time after releasing the steam trigger. This is a

normal function.

Description

1. Removable water tank

2. Removable iron pad

3. “Water empty” / “Clean warning” pilot light

4. Variable steam control*

5. Steam hose

6. Illuminated main power 0/I button

7. “Steam ready” / “Auto shut-off” pilot light

8. Housing with internal steam generator

9. Mains plug

10. Temperature dial

11. Iron´s steam release button

12. Iron pilot light

13. Soleplate

14. Cord clip*

* Model dependent

Preparations (A)

1. Remove any label or protective covering from the

soleplate.

2. Place the appliance horizontally on a solid, stable surface.

You may remove the iron pad from the appliance and place

the iron on it on another solid, stable, horizontal surface.

3. Remove the detachable water tank (1) and ﬁll it, making

sure not to pass the level mark.

4. Fit the water tank back onto the steam tank.

5. Unwind the mains cable fully and plug it into an earthed

socket.

6. Set the main power (6) button to the “I” position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens ts 25 gp100 slider sl25 green power in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens ts 25 gp100 slider sl25 green power Manual

Product: