693647

Siemens Climatix 2 Manual

51
Zoom out
Zoom in
Previous page
1/77
Next page
INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT
-
51
-
The Delay of boiler hopper lid parameter determines how long the opening of the boiler hopper
lid is ignored and the idle boiler is not replaced by another boiler in the cascade.
The parameter setting is ranging from 0 – 600 s; the default value is 0 s.
The instructions for changing this parameter can be found in chapter 4.
The line Boiler operating hours informs about the real operation of the boilers. If a boiler is
replaced, it is necessary to zero the values of this particular boiler in the service menu, the line
Operating hours.
The instructions for changing this parameter can be found in chapter 4.
The line State of communication between boilers (OK/Error) states whether the information
transfer among the boilers works properly.
The instructions for changing this parameter can be found in chapter 4.
The Lock signal parameter determines for all the temperature values of the sensor B10 the
percentage value at which the heat take-off from the cascade should be reduced.
The value 0 % means that the locking was cancelled.
The instructions for changing this parameter can be found in chapter 4.
The PID cascade determines the characteristics of the PID controller, which influences the
dynamics of connecting and disconnecting of boilers in a cascade.
The instructions for changing this parameter can be found in chapter 4.
7.3. INPUT OUTPUT TEST
Here it is possible to check whether the connection and functionality of all electric aggregates
controlled by the control equipment work properly:
• fans
• engines
• pumps
• valves
• ignition
After selecting a particular aggregate (e.g. Feeder 1 in the file Engines) and after clicking on it, the
dialog box opens and offers three possible operating states of this aggregate:
- OFF
- ON
- Auto
The symbol of a hook on the left side of the line indicates which of the functions is active at the
moment. The mode Auto must be active if the operating state is normal.
If ON is selected, the aggregate is put into continuous operation. This deviation from the automatic
mode of the control equipment is indicated with the yellow-red blinking light of the indicator on
button “A” and at the same time with the red blinking light of the indicator on button “B” - see chap.
2.
If OFF is selected, the aggregate is brought to a continuous standstill. This deviation from the
automatic mode of the control equipment is indicated with the yellow-red blinking light of the
indicator on button “A” and at the same time with the red blinking light of the indicator on button “B”
- see chap. 2.
… 51 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-climatix-2

Reset search

  • salve
    chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
    grazie
    Submitted on 11-3-2022 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Climatix 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info