693647

Siemens Climatix 2 Manual

48
Zoom out
Zoom in
Previous page
1/77
Next page
INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT
-
48
-
7.1.9. HEATING DHW CONFIGURATION
The selection DHW (YES/NO) defines whether the heating system is equipped with a DHW
storage tank or not.
The default value is NO. The instructions for changing this parameter can be found in chapter 4.
The setting Cascade – boiler 1 Master is incompatible with the configuration setting DHW (see
chap. 7.1.).
7.1.10. HC1 CONFIGURATION
The selection Heating circuit 1 (No/Mixing HC1/Pump HC1) defines whether the heating system
is equipped with the heating circuit 1 or not. If YES, it is necessary to specify whether it is the
mixing circuit with the mixing valve Y1 or if it is the circuit controlled only by the pump Q2– see
chap. 11.
The default value is NO. The instructions for changing this parameter can be found in chapter 4.
7.1.11. A6 ROOM UNIT CONFIGURATION
The selection A6 Room HC1 (YES/NO) defines whether the room unit A6 (SIEMENS POL 822.70)
is installed in the reference room of the heating circuit 1 or not.
Warning! Do not confuse the room unit A6 and the standard room thermostat. If the room
thermostat is used in the heating circuit 1, it is connected to terminals H1.
The default value is NO. The instructions for changing this parameter can be found in chapter 4.
7.1.12. HC2 CONFIGURATION
The selection Heating circuit 2 (No/Mixing HC2/Pump HC2) defines whether the heating system
is equipped with the heating circuit 2 or not. If YES, it is necessary to specify whether it is the
mixing circuit with the mixing valve Y5 or if it is the circuit controlled only by the pump Q6 – see
chap. 11.
Heating circuit 2 – Mixing HC2 cannot be selected if the boiler has a buffer storage tank.
The default value is NO. The instructions for changing this parameter can be found in chapter 4.
7.1.13. A7 ROOM UNIT CONFIGURATION
The selection A7 Room HC2 (YES/NO) defines whether the room unit 7 (SIEMENS POL 822.70)
is installed in the reference room of the heating unit 2 or not.
Warning! Do not confuse the room unit A7 and the standard room thermostat. If the room
thermostat is used in the heating circuit 2, it is connected to terminals H3.
The default value is NO. The instructions for changing this parameter can be found in chapter 4.
… 48 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-climatix-2

Reset search

  • salve
    chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
    grazie
    Submitted on 11-3-2022 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Climatix 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info