Manual Siemens Climatix 2 (page 46 of 77) (English)

693647

Zoom out

Zoom in

1/77

INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT

Which of the versions is used in the particular boiler is written on the printed circuit board of the

converter that is installed in the installation box on the rear side of the boiler.

7.1.4. IGNITION CONFIGURATION

The selection Ignition (YES/NO) defines whether the boiler is equipped with the automatic ignition

or not. If NO is selected, the function Emptying - NO is automatically set.

The default value is NO. The instructions for changing this parameter can be found in chapter 4.

7.1.5. EMPTYING CONFIGURATION

The selection Emptying (YES/NO) defines the boiler operation during ignition and when all the

appliances are heated up.

The default value is NO. The instructions for changing this parameter can be found in chapter 4.

The selection Ignition – YES, Emptying – YES is used if it is expected that it will be necessary to

put the boiler into operation again and not earlier than several hours after the moment when the

system was heated up. It primarily concerns the operation of a boiler with a buffer storage tank.

If the boiler is turned on, at the same time feeder 1 and feeder 2 are put into operation. The

duration of their operation is set in First feeding (see chap. 7.5.); this period of time is indicated

with the mode “Feeding” on the display and with the yellow light of the indicator on button ”A”.

During this time the feeders are being fed with fuel; they are automatically turned off and the

automatic ignition is put into operation. This period of time is indicated with the mode “Ignition” on

the display and with the yellow-green blinking light of the indicator on button “A”. After ignition the

boiler switches to normal operation, which is indicated with the mode “Operation” on the display

and with the green light of the indicator on button “A”.

If all the appliances and the buffer storage tank are heated up, the control equipment puts feeder 2

(top) out of operation and empties feeder 1 (bottom); the emptying speed depends on the actual

power. This period of time of is indicated with the mode “Emptying” on the display and with the

blinking yellow light of the indicator on button “A”. If this process is finished, the boiler stops

working and the display indicates the mode “External OFF”. The boiler remains in this mode until

it receives a demand for heating from any of the appliances.

If such a demand is received, feeder 1 and feeder 2 are put back into operation. The duration of

their operation is set in First feeding (see chap. 7.5.) and the entire process of “Feeding”,

“Ignition” and “Operation” repeats.

If a demand for heating from an appliance is received during the process of “Emptying”, emptying

continues until the very end of this process, and then the program of automatic “Feeding” and

“Ignition” starts.

The selection Ignition – YES, EMPTYING – NO is primarily used during the operation of a boiler

without a buffer storage tank. It also must be selected if a boiler is not equipped with feeder 2 (e.g.

boilers BENEKOV C).

Before the boiler is turned on, it is necessary to use the manual control (see chap. 6.1.) to transport

the fuel to the burner and to turn on the boiler. Then the automatic ignition is put into operation.

This process is indicated with the mode “Ignition” on the display and with the blinking yellow-

green light of the indicator on button “A”. After ignition the boiler switches to normal operation,

which is indicated with the mode “Operation” on the display and with the green light of the

salve
chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
grazie
Submitted on 11-3-2022 at 12:44
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens Climatix 2 Manual

Product: