693647

Siemens Climatix 2 Manual

37
Zoom out
Zoom in
Previous page
1/77
Next page
INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT
-
37
-
T
SKUT
- Real time in the reference room
T
RW
- Required temperature in the reference room
RZ - Boost heating
After entering the service password (see chap. 5.24.) the function Room unit (Released/Locked) is
displayed. It enables to lock the controlling buttons on the appliance POL822.70. It is used when
the room unit is located in public space, such as schools, hospitals, etc.
6.4.5. HEATING CURVE HC1
T
B9
– Outside temperature
T
B1
– Flow temperature
After clicking on the line Heating curve HC1 it is possible to enter the menu where all parameters
concerning the weather-compensated curve HC1 can be set. It defines two limits of the outside
temperature (Outside temperature B9 - point 1 and Outside temperature B9 - point 2), to which
the required temperature of the heated water at the HC1 inlet is assigned (Initial flow
temperature B1 - point 1 and Initial flow temperature B1 - point 2).
The parameter setting of the Outside temperature B9 - point 1 is ranging from -50 to +10°C; the
default value is -12°C.
The parameter setting of the Initial flow temperature B1 - point 1 is ranging from 25 to 85°C; the
default value is 75°C.
The parameter setting of the Outside temperature B9 - point 2 is ranging from 5 to 30°C; the
default value is 15°C.
The parameter setting of the Initial flow temperature B1 - point 2 is ranging from 25 to 85°C; the
default value is 30°C.
The instructions for changing this parameter can be found in chapter 4.
The parameter Curve exponent sets the curvature of the weather-compensated curve according
to the used system of heating (radiator, floor, or convector). This parameter takes the nonlinear
transfer of heat into account. The following table summarizes the values for commonly used
heating systems:
Heat transfer through: Recommended value of the curve
exponent
Floor heating 1.05 – 1.1
Panel radiator 1.26 – 1.33
… 37 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-climatix-2

Reset search

  • salve
    chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
    grazie
    Submitted on 11-3-2022 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Climatix 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info