693647
29
Zoom out
Zoom in
Previous page
1/77
Next page
INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT
-
29
-
service parameter of the program. This mode is indicated by a pictogram of a “key” in the upper
right corner of the display. After 10 min. without pressing any button on the control panel the
program “locks” again.
After entering the factory password it is possible to modify the system parameters, PID (boiler,
valves, and cascade) or the password. This mode is indicated by a pictogram of three “keys” in the
upper right corner of the display. After 10 min. without pressing any button on the control panel the
program “locks” again.
5.25. APPLICATION NAME
This line enables the user to name the application (boiler installation). It is used primarily for
identification when sending SMS messages and for remote visualization over the Internet.
As Application name it is recommended to use 12 characters at the maximum (it is possible to
use letters without diacritics and numbers).
To end and save the setting is it necessary to use the symbol #.
6. DESCRIPTION OF THE USER MENU
6.1. MANUAL CONTROL
Feeder and fan manual control is used primarily during ignition (it is not necessary if the functions
of automatic feeding and emptying during ignition are activated in the Configuration - see chap.
7.1.), when the fuel must be transported from the storage tank to the burner.
The Feeding manually parameter puts the fuel feeder into continuous operation; the exact time for
the feeder to operate is set in Feeding time manually.
The parameter setting of Feeding time manually is ranging from 0 – 10 min; the default value is 4
min.
The instructions for changing both parameters can be found in chapter 4.
The Fan manually parameter puts the combustion air fan into continuous operation; the exact time
for the combustion air fan to operate is set in Fan on time.
The parameter setting of Fan on time is ranging from 0 – 30 min; the default value is 10 min.
The fan speed when it is in the manual operation mode is set in Fan power manually.
The parameter setting of Fan power manually is ranging from 20 – 100 %; the default value is 30
%.
The instructions for changing all three parameters can be found in chapter 4.
The function Blowing-through is used during cleaning the boiler after removing the grate, when it
is necessary to clean (blow) the air way between the fan and the grate. Activation of this function
puts the combustion air fan into continuous operation and the fan power is set to the maximum. If
the operator does not turn it off, the function Blowing-through automatically deactivates after 1
min.
29


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-climatix-2

Reset search

  • salve
    chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
    grazie
    Submitted on 11-3-2022 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Climatix 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info