693647

Siemens Climatix 2 Manual

28
Zoom out
Zoom in
Previous page
1/77
Next page
INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT
-
28
-
The instructions for changing this parameter can be found in chapter 4.
The Boost source parameter is an increase in the required water temperature compared to the
parameter Comfort DHW or Reduce DHW (according to the values set in the TSP DHW menu),
which ensures that the DHW storage tank is heated at the required temperature.
The parameter setting is ranging from 3 – 15°C; the default value is 10°C.
The instructions for changing this parameter can be found in chapter 4.
DHW priority (No/Absolute/Shifting) defines the order in which the DHW storage tank is heated
compared to the rating circuits.
If the mode No is selected, heating of the DHW storage tank is in parallel with heating of the
heating circuits. This selection is recommended by the manufacturer.
If the mode Absolute is selected, heating of the DHW storage tank takes precedence over heating
of the heating circuits.
The default value is No.
If the mode Shifting is selected, heating is reduced only if the boiler power is insufficient for the
demand of all the appliances.
The instructions for changing this parameter can be found in chapter 4.
WARNING!!! If the boilers are connected in a cascade it is not possible to use the B3 sensor in the
controlling boiler 1 (“Master“) for DHW heating. This input is used for the cascade sensor
B10. DHW can be heated in other boilers of the cascade (boiler 2, boiler 3, and boiler 4).
5.21. FUEL
It displays the selected fuel type for combustion (Wood pellets/Brown coal/Other fuel). Based on
this selection, the control equipment determines the fuel feeding speed and the fan power
according to the default values – see chap. 5.6. and 5.7.
5.22. USER MENU
After clicking on this line it is possible to enter the user menu; no password is required.
5.23. SERVICE MENU
After entering the service password (see chap. 5.24.) it is possible to enter the service menu.
5.24. PASSWORD ENTER
After entering the service password it is possible to enter the service menu and to modify all
… 28 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-climatix-2

Reset search

  • salve
    chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
    grazie
    Submitted on 11-3-2022 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Climatix 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info