Manual Severin BA-3286 (page 12 of 74) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712422

Zoom out

Zoom in

1/74

selected setting and save it for future ironing.

Re- lling with water

As soon as the water in the reservoir needs to

be replenished, the symbol

appears in the

display and a beep signal is heard. Proceed as

described in the section Filling with water.

Cable guide

To facilitate ironing,  t the cable guide

(provided) into the rear opening and run

the connecting hose through the loop on the

upper part of the cable guide.

Start up

Before being used for the  rst time, the iron

should be heated up and cleaned as follows:

Fill the reservoir with clean tap water. –

Place the iron on its rest and insert the –

plug into a suitable wall socket.

Use the On/O switch to turn on the –

appliance.

A beep signal is heard and the display –

shows the medium setting for the water

hardness level

, as well as the medium

setting for the steam output selection

 e symbol –

starts  ashing to indicate

that the boiler is heating up.

Set the temperature control to its –

maximum setting.

As the iron is heating up, the temperature –

indicator lamp on the iron will be on.

It goes out once the required ironing

temperature is reached.

Use the –

button and the + / − buttons

to set the appropriate hardness level as

described in the section Adjusting the level

of water hardness.

Use the + / − buttons to select the –

maximum steam output

While the appliance is heating up, the –

display shows the symbol for the steam

pressure already available for steam

ironing

 e symbol disappears once the water –

in the boiler has reached the required

temperature.

As soon as the steam output indicator z

‘4’

appears in the display, pass the

sole plate over a clean cotton cloth, while

repeatedly using the steam button in short

bursts to clean the sole plate.

Now clean the appliance according to z

the instructions given in the paragraph

General Care and Cleaning.

 is will remove possible dust particles z

from the sole plate and subsequently

lessen the smell typically encountered

when  rst switching on. Ensure su cient

ventilation.

General information about ironing

Always check  rst whether a label with

ironing instructions is attached to the article

to be ironed.

 e meaning of the ironing symbols is as –

follows:

• synthetics

(low temperature)

•• silk and wool

(medium temperature)

••• cotton and linen

(high temperature)

 ese markings can also be found on the –

temperature control knob of the iron in

the form of dot symbols.

Laundry to be ironed should be z

sorted according to the fabric ironing

temperature. Follow the ironing symbols

and start with the lowest temperature.

When ironing highly sensitive fabrics, z

or if you are not sure about the fabric,

carefully test-iron on a non-visible point,

e.g. inside a seam. Always start with the

lowest temperature.

If the laundry is put into a dryer before z

ironing, the temperature should be

adjusted to ‚iron dry‘. Very dry fabrics are

di cult to iron.

Steam ironing

Steam ironing requires high temperatures. z

 e appropriate level for steam ironing

is indicated on the temperature control

knob.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin BA-3286 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin BA-3286 Manual

Product: