Manual Severin BA-3286 (page 13 of 74) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712422

Zoom out

Zoom in

1/74

Fill the water reservoir with clean tap –

water.

Place the iron on its rest and insert the –

plug into a suitable wall socket.

Use the On/O switch –

to turn on the

appliance.

 e –

symbol starts  ashing to indicate

that the boiler is heating up.

Set the temperature control knob to the –

required ironing temperature according

to the ironing symbols.

As the iron is heating up, the temperature –

indicator lamp on the iron will be on.

It goes out once the required ironing

temperature is reached.

Use the + and – buttons to select the –

desired steam output:

minimum

medium

maximum

While the appliance is heating up, the –

display shows the symbol for the steam

pressure already available for steam

ironing

 e symbol –

disappears out once

the water in the boiler has reached the

required temperature.

As soon as the steam output indicator ‘ – 4’

appears in the display, the water in the

boiler is su ciently hot for steam ironing.

Before starting to iron, the sole plate –

should be cleaned by passing it over a

clean cotton cloth, while using the steam

jet function; this helps to  ush out any dirt

residues or lint particles trapped inside the

openings in the sole plate.

You can now start ironing; press the steam –

button as required.

 e steam function may also be used with –

the iron held vertically, to remove creases

or wrinkles from fabrics.

If, during ironing, the water reservoir z

becomes empty, simply re- ll it as

described in the section ‘Filling with

water’. Always replenish the water in

good time, whenever the symbol

starts

 ashing.

Turn the appliance o a er use. Replace z

the iron on its rest on the steam generator

and remove the plug from the wall socket.

Once the appliance has cooled down z

su ciently, the power cord and

connecting hose may be carefully wound

up and stored in the side holder.

Dry-ironing

For dry-ironing (i.e. ironing without steam),

proceed as described in the section Steam

ironing and use the + and – buttons to select

the ‘no steam’-symbol

in the display.

Spray function

 e spray function can be used at any time.

To  ll the water tank for the spray function,

pull o the entire spray assembly and take

o the tank. Fill the tank with clean water,

observing the ‘Max’ marking and replace

it. Ensure that the two arrow markings are

properly aligned, i.e. facing each other.

Replace the spray assembly.

Automatic switch-o

If the appliance is not used for more than

10 minutes, it will automatically switch into

‘Pause’ mode.  is is indicated by a beep

signal and the

pause symbol in the display.

To continue ironing, re-activate the appliance

by pressing the On/O switch

or the steam

button and allow it to re-heat for around two

minutes.

General care and cleaning

Before cleaning the appliance, ensure it is z

disconnected from the power supply and

has completely cooled down.

To avoid the risk of electric shock, do not z

clean the appliance with water and do not

immerse it in water.

Do not use abrasives or harsh cleaning z

solutions.

If necessary, the appliance may be wiped z

with a dry lint-free cloth.

Iron

Starch, fat and other deposits on the sole –

plate may be removed with a woollen

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin BA-3286 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin BA-3286 Manual

Product: